Q-See QT5, AND QSD2308/16 DVRS, QSDT setup guide Pic

To access the DVR through Internet Explorer: once you have setup the network settings on the DVR to match the settings of your router and forwarded the ports needed by the DVR (for remote access over the internet), you need to modify your browser controls. You need to allow Pop-ups. To do so go to the Internet Explorer tool bar and select the "tools" option (RED box in Pic 9), then select the "Pop up Blocker" option and select "Turn Off Pop-up Blocker” (BLUE arrows in Pic 9). You will also need to enable Active X controls. To do so go to the Internet Explorer tool bar and select the "tools" option, then "Internet Options"(GREEN arrow in Pic 9).

Pic 9

Pic 10

Click on Security Tab. Click on Trusted Sites. Click on Sites button.

Pic 11

Uncheck the box for Require Server verification. Put the IP addess of the DVR or WAN IP address in the Add this websites to the zone box and click on Add button. Click on Close.

Page 7