Invacare MA95Z manual Installing the Side Rails Installing the Power Unit

SECTION 2—OPERATION

Head End

Powered Mattress

NOTE: Mattress cover not shown for clarity.

Buckle

Straps

Hose Foot End

FIGURE 2.1 Installing the Mattress Replacement System

Installing the Side Rails

WARNING

Patient entrapment with bed side rails may cause injury or death. Mattress MUST fit bed frame and side rails snugly to prevent patient entrapment. Follow the manufacturer’s instructions. Monitor patient frequently. Read and understand the Owner’s/Operator’s Manual prior to using this equipment. Invacare product manuals are available at www.invacare.com or your dealer.

NOTE: Refer to the instructions provided with the side rails for the installation procedure.

Installing the Power Unit

NOTE: For this procedure, refer to FIGURE 2.2.

1. Pull out the bed hook on the back of the	Bed Hook
control unit.

2. Place the control unit on the footboard.

NOTE: If the bed does not have a footboard, place the control unit on a flat surface, leaving room for the hose to hang down.

FIGURE 2.2 Installing the Power Unit

Part No 1148139 11 MA90 Series