Invacare 6816A, IH5748A, 6815A, 6808A Installing/Using Nylasar Bed Rails, Using the Epoxy Bed Rails

Page 4

6.Secure the bed rail to the mounting bracket with the two socket screws.

7.Head End Mounting Bracket Only - Position the crossmember between the two bed rails as shown in Detail “A” of FIGURE 2 on page 3.

8.Repeat STEPS 3-7 to install the other bed rail on the opposite side.

9.When installing bed rails 6815A, 6816A or 6803A on a bed used with an 80-inch mattress, the head board mounting brackets MUST be adjusted. Refer to Changing the Head Board Mounting Position on page 6.

Using the Epoxy Bed Rails

NOTE: For this procedure, refer to FIGURE 3.

1.Perform one of the following:

•Raising - Pull up on the bed rails while rotating towards the head end of the bed until the bed rail locks into place.

•Lowering - Pull up on the release lever and push down on the bed rail while rotating towards the foot end of the bed until the bed rail lowers into place.

 

Towards Foot End

Bed Rail

of Bed

Release Lever

FIGURE 3 Using the Epoxy Bed Rails

Installing/Using Nylasar Bed Rails

NOTE: The hardware shown in FIGURE 4 on page 5 is already assembled to the bars and latch arms before shipment. It is not necessary to remove the hardware from the bolt or to remove the bolt from the bars or latch arms. Holding the bolt in place while removing the hex nuts will prevent the hardware from becoming disassembled. In case of disassembly, refer to FIGURE 4 on page 5 for the correct placement of the hardware.

Installing the IH5748A Bed Rails

NOTE: For this procedure, refer to FIGURE 4 on page 5.

NOTE: Invacare recommends two people perform the following installation procedure. One person should hold the bed rail up against the bed and one person should attach the rail to the bed.

1.Position the bed rail on the bed frame with the release lever towards the foot end of the bed.

2.Loosen and remove the hex nut from the latch arm at the foot end of the bed (Detail “B”).

ICCG Bed Rails

4

Part No 1143214

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Safety Summary Iccg Bed RailsInstalling/Using the Epoxy Bed Rails Installing 6801A and 6808A Bed RailsInstalling 6815A, 6816A and 6803A Bed Rails Installing 6815A, 6816A and 6803A Bed RailsUsing the Epoxy Bed Rails Installing/Using Nylasar Bed RailsInstalling the IH5748A Bed Rails Using the IH5748A Bed Rails Using the IH5748A Bed RailsChanging the Head Board Mounting Position Changing the Mounting Position of the Mattress KeepersAppendix Bed Rail Entrapment StatisticsPatient Safety Benefits and Risks of Bed RailsWhich Ways of Reducing Risks are Best? Meeting Patients Needs for SafetyPatient or Family Concerns About Bed Rail Use Developed by the Hospital Bed Safety Workgroup AarpLimited Warranty USA

6801A, 6815A, 6808A, 1143214, 6816A specifications

Invacare is a leading manufacturer of durable medical equipment that enhances the quality of life for individuals with mobility challenges. Among its extensive product lineup, the Invacare IH5748A, 6803A, 6816A, 1143214, and 6808A represent a range of advanced features, technologies, and characteristics designed to meet diverse user needs.

The Invacare IH5748A is recognized for its lightweight, yet durable design, making it ideal for both indoor and outdoor use. Its height-adjustable legs ensure a personalized fit, contributing to user comfort. The IH5748A also features a removable backrest and padded seat which provide additional support and comfort.

Next in the lineup is the Invacare 6803A. This model comes equipped with a robust frame and features a unique folding design, promoting easy transport and storage. It offers a wide seat width, enhancing user accessibility while still being agile enough for maneuverability in tight spaces. The 6803A includes durable, easy-to-clean upholstery that is not only practical but also stylish.

The Invacare 6816A stands out with its superior stability, which is crucial for users requiring extra security while sitting. This model integrates advanced technologies such as an ergonomic armrest system and sturdy footrests, facilitating ease of use. The 6816A also presents adjustable back support, which can be fine-tuned to suit individual preferences.

On the other hand, the Invacare 1143214 combines functionality with modern aesthetics. This model features a sleek design with an emphasis on user customization. Its unique quick-release mechanism allows for easy adjustments without the need for tools. Additionally, the adjustable seat height means users can find their most comfortable position.

Finally, the Invacare 6808A emphasizes both safety and convenience. It has anti-tip bars and skid-resistant surfaces to enhance stability. This model also integrates a convenient folding mechanism for ease of transport, making it suitable for people on the go.

Overall, the Invacare product range exemplifies cutting-edge engineering, catering to various needs in mobility assistance. The combination of comfort, safety, and functionality found in models like the IH5748A, 6803A, 6816A, 1143214, and 6808A makes them essential choices for users seeking independence and mobility. With their specialized features, these products truly enhance the everyday lives of their users.
Top Page Image Contents