Alpine IVA-D900 owner manual System Setup Operation, 33-EN

Page 35

System Setup Operation

To display the System mode screen:

To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below.

1.Brake to bring your vehicle to a complete stop at a safe location. Engage the parking brake.

2.Keep pushing the foot brake and release the parking brake once then engage it again.

3.When the parking brake is engaged for the second time, release the foot brake.

•For automatic transmission vehicles, place the transmission lever in the Park position.

Now, the locking system for the System mode operation has been released. Engaging the parking brake can reactivate the System mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of “To display the System mode screen.”

Each time the ignition is turned OFF, perform the procedure of “To display the System mode screen.”

The following steps 1 to 6 are common operations to each “Setting item” of SYSTEM Setup. Refer to each section for details.

1 Press SOURCE/POWER.

The main menu is displayed.

2 Press 6 (SETUP).

The Setup mode screen appears.

3 Turn the Rotary encoder to select “SYSTEM,” then press the Rotary encoder.

The SYSTEM list is displayed.

4 Turn the Rotary encoder to select your desired setting item.

The screen shows the ∗Function Guide.

*Displays the function assigned for each button (the Function buttons).

Setting items:

NAV.MIX ↔ NAV.IN ↔ AUX IN1 ↔ AUX IN2 ↔ AUX IN3

↔AUX IN1 MODE ↔ AUX IN2 MODE ↔ AUX IN3 MODE

↔CAMERA IN ↔ MONITOR OUT1 ↔ MONITOR OUT2

↔IN-INT MUTE ↔ IN-INT ICON ↔ A.PROC TYPE

5 Press the function buttons to switch the setting.

6 Press 7 (RETURN).

The screen returns to the previous one.

•With the System screen displayed, pressing and rotating the rotary encoder will adjust the volume level.

•Immediately after inputting titles or changing the settings of System Mode (While the system is inputting the titles or data automatically) do not turn the ignition key (engine key) to OFF. Otherwise, a title may not be written, or the settings may not be changed.

Navigation Interruption and Adjusting its Volume

Setting item: NAV.MIX

Setting content: OFF / ON

With an Alpine navigation system connected to the IVA-D900, the voice guidance of the navigation system will be mixed with the radio or CD play. You can adjust the volume level of the voice guidance.

OFF: The navigation interruption mode is turned off.

ON: The navigation interruption mode is on.

1)After setting it to ON, press the Rotary encoder to select

NAV.MIX mode.

VOL. → NAV. → SUB W. → BAL. → FAD. → DEFEAT → VOL.

2)Turn the Rotary encoder to adjust the volume (0 to 15) of

the navigation voice.

•The audio volume during the navigation guide can be set by adjusting the audio volume while the navigation guide continues. When the navigation guide finishes, the previous audio volume and the previous screen are restored. For exception, if the navigation cuts in when the audio volume is lower than the setting level, the audio volume during the navigation guide is reset the current listening volume. (When the navigation guide cuts in, the audio volume does not increase.)

•This setting is effective when NAV.IN of SYSTEM list screen is ON.

•When PXA-H510 or PXA-H900 is connected, NAV.MIX value set in this unit does not affect PXA-H510 or PXA-H900.

Setting the Navigation Mode

When you connect an optional navigation equipment, set it to ON.

Setting item: NAV. IN

Setting contents: OFF / ON

ON: Navigation source is displayed.

OFF: Navigation source is not displayed. The settings related to the navigation can not be changed from this unit.

Setting the AUX Mode

Setting item: AUX IN 1, 2, 3

Setting content: OFF / LEVEL LOW / HIGH

OFF: AUX source is not displayed.

LEVEL LOW/HIGH:

The sound volume from the external equipment can be adjusted. When LOW or HIGH is selected, AUX source will be ON.

•OFF is not displayed when the optional DVD player or DVD changer is connected.

•When OFF is selected, the settings related to AUX can not be changed from this unit (except for “Name external equipment to be displayed” page 34).

•When either DVD player or DVD changer is connected to AUX IN 1, DVD is displayed on the screen. When both of them are connected, DVD is displayed for AUX IN 1 and DVD CHG is displayed for AUX IN 2.

Continued

33-EN

Page 34 Page 36
Image 35
Page 34 Page 36
Contents IVA-D900 CHA-1214CHM-S630 CHA-S634Contents Navigation System Optional Installation and Connections Operating Instructions Precautions DVD ALL Basic Operation Getting StartedRaising/Lowering the Monitor Turning Power On or OffDetaching and Attaching the Front Panel Initial System Start-UpMoving the monitor to be Flat Adjusting the Monitor Viewing AngleLowering Volume Quickly Selecting the Monitor Opening AngleRadio Manual Storing of Station PresetsAutomatic Memory of Station Presets Tuning to Preset Stations12-EN PlaybackRepeat Play 13-EN X. Random PlaySelecting Folders concerning MP3 About MP314-EN DVD/Video CDPlaying DVD/Video CD TerminologyPress c To display the DVD mode screenDisplay shows the DVD player mode screen 15-EN16-EN Stopping Playback PRE StopStopping Playback If a menu screen appearsChapter/Track/Title Repeat Playback Playing Still Frames PausingFast-forwarding/Fast-reversing Slow Motion PlaybackSearching Directly by Chapter or Track Number Switching the Angle DVD onlySwitching the Audio Tracks Searching by Title Number DVD onlyDisplaying the Disc Status for Video CD Switching the Subtitles Subtitle Language DVD onlySwitching from the disc menu Displaying the Disc Status for DVD20-EN Sound SettingSetting the MX mode 21-EN Setting the Bass EngineSetting the Bass Control Setting the Treble Control22-EN About the Time CorrectionBass Focus 23-EN Adjusting the Built-in CrossoverSubwoofer On and Off Time Correction24-EN Other Useful FeaturesTitling Radio Stations/Discs Displaying the Title List25-EN Setting of ScrollingRear Enter Function 26-EN Blackout Mode On and OffSwitching Display Modes DemonstrationMain menu appears on the display Switching the Visual Source Only Simul FunctionDisplaying the Spectrum Analyzer 27-EN28-EN SetupDVD Setup Operation 29-EN Setting of the Subtitle LanguageChanging the Country Code Setting Setting the Rating Level Parental Lock30-EN Changing the Digital Output SettingSetting item Digital OUT Mode Setting contents Auto / Lpcm 31-EN General Setup Operation32-EN 33-EN System Setup Operation34-EN 35-EN Display Setup OperationMain menu screen appears on the display Operating Auxiliary Devices Optional36-EN 37-EN Display changes to the CD changer mode screenChanger Optional Controlling CD Changer Optional38-EN XM Radio OptionalMulti-Changer Selection Optional Receiving XM Channels with the XM Receiver OptionalChanging the Display Tuning in to Categorized ProgramsStoring XM Channel Presets Checking the XM Radio ID Number40-EN MobileHub Link OptionalDisplaying the Category/Channel Name Title List About MobileHub Link OptionalDial call Calling by using the Speed DialTelephone Reception CallingReceiving a Short Message SMS Short Message Service OperationCalling by the address book Calling by the outgoing / incoming Absent incoming historyPress 1 to send Sending a standardized sentence43-EN Pres the 6 SMS Write44-EN Adjustment Procedure for Dolby Surround45-EN Setting the SpeakersSet MX Mode of the External Audio Processor 46-EN Over AdjustmentPerforming Time Correction Manually TCR/ Swithing the Phase Check that Defeat mode is off47-EN Graphic Equalizer AdjustmentsParametric Equalizer Adjustments 48-EN Bass COMP. SettingSpeaker Setup Bass FocusMixing bass sound to the rear channel Setting of Dolby 5.1chAdjusting the acoustic image Achieving powerful high volume soundAdjusting the speaker levels Adjusting the DVD LevelStoring Settings in the Memory Getting out the Preset MemoryTurn the Rotary encoder to select Dolby PL Using the ProLogic II ModeLinear PCM Setting 51-EN52-EN Remote ControlOperating for the IVA-D900 53-EN 54-EN Operating the DVD player/DVD changer sold separately55-EN Operating the Navigation sold separatelyOperating a separately sold TV monitor 56-EN Battery ReplacementOpening the battery cover Replacing the battery57-EN InformationAbout DVDs Linear PCM audio Lpcm TerminologyDolby Digital Dolby Pro LogicFor details, see List of Language Codes59-EN 60-EN List of Country Codes61-EN CD/MP3/DVD/Video CD Case of DifficultyBasic Radio63-EN Indication for CD/MP3Monitor Indication for DVD/Video CD64-EN 65-EN Indication for XM radio modeIndication for CD changer Bottom side of Monitor player Specifications66-EN 67-EN Installation and Connections68-EN InstallationInstalling the Monitor 69-EN Installing the Tuner BoxInstalling the DC/DC Converter Mounting the remote control holderFoot Brake Lead / Parking Brake Lead Connection Connection Diagram of Spst Switch Sold SeparatelyIf the ACC power supply is not available Parking Brake Lead Connection71-EN Connections IVA-D900 Wiring Diagram72-EN 73-EN System ExampleAUX Video Input AUX1 Terminal Digital Output Terminal Ai-NET Connector74-EN AUX Video/Audio Input AUX3 Terminal Camera Input Terminal When Connecting External Equipment75-EN IVA-D900 Tuner BOXA -800-ALPINE-1 1-800-257-4631 Canada 1-800-ALPINE-1 This Warranty does not cover the following

IVA-D900 specifications

The Alpine IVA-D900 is a sophisticated multimedia receiver that seamlessly blends advanced technology with user-friendly features, designed to elevate your in-car entertainment experience. With a sleek and stylish design, this unit is not only visually appealing but also packed with functionality tailored for modern drivers.

One of the standout features of the IVA-D900 is its large 7-inch motorized touchscreen display. This high-resolution LCD screen provides vibrant visuals, making navigation through menus and multimedia content intuitive and enjoyable. The motorized aspect not only saves space when not in use but also adds a touch of modern sophistication to your vehicle's interior.

Connectivity is a key component of the IVA-D900, as it comes equipped with various options, including Bluetooth technology. This allows for hands-free calling and audio streaming, ensuring you can stay connected without compromising safety. Additionally, the unit features USB and aux inputs, enabling you to easily connect your smartphone or external devices.

The IVA-D900 is compatible with a range of digital media formats, offering support for CDs, DVDs, MP3s, and WMAs. This flexibility means that whether you prefer to listen to your favorite playlists or enjoy a movie during long trips, the receiver can cater to your multimedia needs. The integrated DVD player ensures that passengers can enjoy entertainment while on the road.

To enhance the audio experience, the Alpine IVA-D900 features a robust equalizer and sound customization options. Users can adjust bass, treble, and balance to suit their audio preferences. Furthermore, it is compatible with advanced audio formats, ensuring that your music sounds crisp and clear, no matter the genre.

Safety is also a priority with the IVA-D900, as it includes support for rear-view cameras, providing an added layer of security while reversing. The system can integrate with various navigation options, offering turn-by-turn directions that are essential for long-distance travel or exploring new areas.

In summary, the Alpine IVA-D900 is an exceptional multimedia receiver that combines cutting-edge technology with ease of use. Its large touchscreen, robust connectivity options, and powerful audio features make it a prime choice for anyone looking to upgrade their in-car entertainment system. With safety features and multimedia versatility, the IVA-D900 is not just a receiver; it's a gateway to an enhanced driving experience.
Top Page Image Contents