249.45ST TREADMILL
ASSEMBLY
STEP 7: Attach adjustable cylinder to treadmill frame
WARNING: THE PATENTED HYDRASUSPENSION SYSTEM REQUIRES THE ADJUSTABLE CYLINDER TO BE TIGHT FITTING. PLEASE BE PATIENT WITH THIS ASSEMBLY STEP.
(A)Put Adjustable Cylinder
(B)Attach the bottom of the Adjustable Cylinder (310) to the left Cylinder Mounting Shaft
(509)and secure with one washer (846) and one M8 nylon nut (826).
(C)Attach the head of the Adjustable Cylinder (310) to the left upright (301):
a:Align the through hole on the head of the Adjustable Cylinder (310) with the mounting hole on the frame (301).
b:As you slide the threaded shaft (845) through the aligned holes .
(D)Secure the cylinder head with two M8x15mm Allen Head Bolts (843).
(E)Repeat this procedure to assemble the Adjustable Cylinder on the right side of the frame.