Hoist Fitness CL-2103 owner manual Seat Adjuster Belt Assembly Latch Assembly Cam Belt

A SS E M B LY

I N S T R U C T I O N S

Step 2d

F R A M E A S S E M B L Y

In this step start by attaching the Belt Assembly to the Weight Assembly(prior to attaching the Cam Belt). Next, slide the Cam Belt through the Roller Bracket on the top of the Weight Cage. Then, secure the two 3 1/4” Pulleys to the Weight Cage under the Cam Belt. Next, attach the Latch Assembly to the Seated Assembly by sliding the 1.55 x

.25 Dia. Shaft through the mounts and through the Adjustment Spring and secure with the C-Clip; also, insure that the Adjustment Spring ends are pointing down to ensure that the Latch Assembly locks the Seat Adjuster in place. Next slide the two EZ Glide Sleeves into the Seated Assembly from the top down until the locating boss snaps into the location hole. Next slide the Seat Adjuster in the Seated Assembly. Wrench tighten bolts.