Hoist Fitness CL-2103 owner manual Ss E M B Ly

A SS E M B LY

I N S T R U C T I O N S

Step 2c

F R A M E A S S E M B L Y

In this step start by pressing two Guide Rod Bushings into the Weight Cage. Take the two 3” x 1” I.D. Bumpers and place them over the two holes in the bottom of the Weight Cage and slide the Guide Rods into the holes. Make sure the Guide Rods are lube with Spindle Oil. Now slide the 20 LBS. Intermediate Weight Plates and 15 LBS. Aluminum Top Plate onto the Guide Rods and secure. Make sure the Weight Stack and its Guide Rods are sitting level. Next, attach the 5/8” Dia. x 6 13/32” Rod to the Center RH BRK (Add-On). Secure the Center RH BRK (Add-On) to the 15 LBS. Aluminum Top Plate. Slide on three 5 LBS. Add-On Weights and attach the 5/8” Dia. x 6 13/32” Rod to the Weight Assembly. Attach the 12” x 14 1/2” Upholstery Seat to the Seat Adjuster. Attach one end of the Selector Pin Lanyard to the 15 LBS. Aluminum Top Plate, and the other end to the Weight Selector Pin. Then Wrench tighten bolts including all previously hand tightened bolts.

Part Descriptions

7 - 41 13/16 x 3/4” Dia. Guide Rod

8 - 20 LBS. Intermediate Weight

9 - 15 LBS. Aluminum Top Plate

10 - 3” x 1” I.D. x 1 1/2” THK Bumper 11 - Guide Rod Bushing (PLAS 134)

12 - Center RH BRK (Add-on)

13 - 12” x 14 1/2” Upholstery Seat

14 - Seat Adjuster

22 - 5/8” Dia. x 6 13/32” Rod

27 - Add On Weight Bushing

Hardware Descriptions

J - 5/16” x 1 1/4” Button Head Cap Screw K - 3/8” x 2 3/4” Button Head Cap Screw L - 5/16” Flat Washer

P - 3/8” Lock Washer

S - 3/8” x 1” Button Head Cap Screw U - 5/16” Lock Washer

Z - 3/8” Split Washer

AR - 5 LBS. Add on Weight AS - Weight Selector Pin AT - Selector Pin Lanyard AX - Guide Bearing

AY - Guide Bearing

BC - 5/16” x 1” Button Head Screw BF - 5/16” Lock Washer (black) BG - 3/8” Flat Washer (white zinc) BH - 3/8” Lock Washer (black)

BJ - 5/16” Flat Washer (white zinc)

Page - 9

HOIST

FITNESS SYSTEMS

R

2103 Assembly