Symptom | Probable Cause | Corrective Action | Recommended Tools |
SPEED
FLUCTUATION
E2: CAL
Speed Fluctuation (Due to high friction)
Speed Fluctuation (Due to Voltage fluctuation)
Bad Data Feedback
Incorrect Speed Sensor Gap
•Perform Push Off Test (page 21)
•Perform Amp Draw Test (page 17)
•Check Line voltage for fluctuations.
•Have customer take corrective action.
•Verify tach feedback accuracy through out the speed range.
•If inaccurate perform speed sensor test
(page 18)
•Verify correct Speed sensor Gap.
•Gap should be equal to the thickness of
(3) credit cards pressed together (approximately 1/8 to ¼ inch)
Socket Set
Silicone Lubrication Packet
Silicone Lubrication Applicator
Note: All trouble shooting should be performed in Calibration Mode:
See Page 14
Page 10
Support Services | Fax: | |
|
|
|