Aiphone IS-DVF-HID-I Wiring Diagram, Testing & Operation, Specifications, Card Reader Camera

Page 2

WIRING DIAGRAM:

IS-MV

 

IS-CCU

 

 

 

 

 

 

 

CAT-5e

IS-PU-UL

IS-DVF-HID-I

 

 

 

CAT-5e

 

 

 

 

NO

COM

NC

To Strike

& Power

TESTING & OPERATION:

Connect the reader to the host according to the wiring table below and the host installation guide.

Wiegand Wire

Color

 

 

+ DC (10-16V)

Red

Ground

Black

Data0

Green

Data1

White

Shield Ground

Drain

Green LED

Orange

Red LED

Brown

Beeper

Yellow

Hold

Blue

---

Violet

 

 

When power is applied to the iCLASS® reader, the LED will turn RED while the beeper beeps simultaneously 3 times (the last tone is a higher frequency). The LED will then flash once after the last tone. This indicates that the microcontroller is operating properly.

Present an iCLASS ID card to the reader (hold card directly in front of reader). The LED will momentarily turn green while the beeper beeps once, indicating that the card was read successfully.

SPECIFICATIONS:

CARD READER:

 

CAMERA:

 

Reader type:

R10 (Rev. C)

Camera unit:

CMOS camera

Power Source:

10 ~ 16V DC

Scanning line:

525 lines

Current:

80mA (Avg); 300mA (peak)

Min. illumination:

5 Lux at 1’6”

Transmit Freq.

13.56 MHz

Terminations:

RJ45 jack for audio/video

Terminations:

Color-coded pre-wired pigtail

 

Screw terminals for door release

Wiring Distance:

500’

Operating Temp:

14° ~ 140°F / -10° ~ 60°C

Operating Temp:

14° ~ 140°F / -10° ~ 60°C

Wiring Distance:

980’ with Cat5e/6 cable

Operating Humidity:

5-95% relative humidity

Dimensions:

12-3/8” H x 7” W

 

non-condensing

w/SBX-ISDVFP:

12-13/16” H x 7-1/16” W x 2-13/16” D

 

 

 

(top), 1-13/16” D (bottom)

Aiphone Corporation

1700 130th AVE NE

Bellevue, WA 98005

(425)455-0510 Fax: (425) 455-0071

FCC WARNING:

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference.

(2)This device must accept any interference that may cause undesired operation.

For proper regulatory compliance, the drain wire should be disconnected at the power supply end of the cable.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

The Reader is intended to be powered from a limited power source output of a previously certifed power supply

TOLL FREE TECHNICAL SUPPORT:

(800) 692-0200

E-MAIL: tech@aiphone.com

Pg. 2 IS-DVF-HID-I Instr. 0311JD

Image 2
Contents IS-DVF-HID-I InstructionsSpecifications Wiring DiagramTesting & Operation Card Reader Camera

IS-DVF-HID-I specifications

The Aiphone IS-DVF-HID-I is an advanced video intercom system that represents the intersection of cutting-edge technology and practical functionality in security communication. Designed for both residential and commercial applications, this device offers a comprehensive solution for ensuring safety and facilitating clear communication between various points of entry and interior spaces.

One of the standout features of the IS-DVF-HID-I is its high-definition video capability. With a 1.3 Megapixel camera and a wide-angle lens, users can enjoy a clear and detailed view of visitors, making it easier to identify individuals before granting access. This feature is especially valuable in high-security environments where visual confirmation is critical.

Enhanced with night vision technology, the IS-DVF-HID-I is capable of delivering high-quality video footage even in low-light conditions. This ensures that users can maintain visibility and security around the clock, regardless of external lighting conditions.

Another significant characteristic of the Aiphone IS-DVF-HID-I is its integration with HID technology. This allows for convenient access control via RFID card readers, enabling users to manage entry in a seamless manner. The device supports both audio and video communication, allowing users to engage with visitors through a two-way intercom feature, ensuring clarity and responsiveness.

Installation is made easy with Power over Ethernet (PoE) support, which eliminates the need for separate power sources and simplifies wiring. This feature not only reduces installation costs but also contributes to the overall reliability of the system.

The device's robust construction is designed to withstand various environmental conditions, making it suitable for outdoor settings. It includes an IP66-rated enclosure, providing protection against water and dust ingress, which is essential for longevity and durability in busy entryways.

Aiphone's commitment to user-friendly design is evident in the IS-DVF-HID-I’s interface, which is intuitive and accessible. Users can easily customize settings and manage visitor logs, making it a practical choice for residential complexes and commercial buildings alike.

In summary, the Aiphone IS-DVF-HID-I combines high-definition video quality, RFID access control, robust construction, and user-friendly features to create a versatile intercom solution. It is an excellent choice for those seeking a reliable and efficient way to enhance their security systems.