Toshiba IK-53V instruction manual HD/VD Output Amplitude Specifications, HD Input Specifications

5. Input Output Signal Specifications

HD/VD Output Amplitude Specifications

HD 4.5V

0V

VD 4.5V

0V

The amplitude level is the representative value when terminated with 10kΩ. Output is enabled when the rear panel HD/VD signal input/output switch is set to the INT side.

HD Input Specifications

2.0 to 5.0Vp-p

2.0∝s to 5.0 ∝s

*Input impedance: 75Ω or 10kΩ or greater

*Input amplitude 2.0 to 5.0 Vp-p (75Ω termina- tion ON or OFF)

*Voltage and pulse width were measured at pin 6 of the 12-pin connector located on the rear panel.

VIDEO INDEX Output Specifications

4.5V

0V

525H (Partial scanning OFF)

175H (Partial scanning ON)

Trigger Pulse Specifications

2 to 5.0V

0 to 0.4V

(Positive polarity mode)

More than 2∝s

The amplitude level is the representative value when terminated with 10kΩ.

More than 2∝s

2 to 5.0V

0 to 0.4V

(Negative polarity mode)

VD Input Specifications

2.0 to 5.0Vp-p

5H to 21H

*Input impedance: 75Ω or 1kΩ or greater

*Input amplitude 2.0 to 5.0 Vp-p (75Ω termina- tion ON or OFF)

*Voltage and pulse width were measured at pin 7 of the 12-pin connector located on the rear panel.

*Input impedance: 10kΩ or greater

*Voltage and pulse width were measured at pin 11 of the 12-pin connector located on the rear panel.

PART Input Specifications

H:2.0 to 5.0 V

L:0 to 0.4 V

15