Toshiba IK-53V 2. CAMERA PARTS AND FUNCTIONS

2. CAMERA PARTS AND FUNCTIONS

Top/Bottom/Front Side

[Top]

4[Bottom]

[Front]

Lens mount (C mount)

This is used to mount a C-mount type lens or

optical equipment.

Camera fixing reference hole (top side)

Camera fixing reference hole/Tripod fixing metal

screw hole (bottom side)

Camera fixing reference hole/Tripod fixing metal

screw hole (bottom side)

Imaging area

The protection cap is attached on the lens mount

portion. After removing the cap, mount the lens.

Be careful not to scratch or touch the optical

area.

Contents

Main CCD CAMERA IK-53V/IK-52V OPERATING GUIDE CONTENTS 1. GENERAL 2. CAMERA PARTS AND FUNCTIONS Top/Bottom/Front Side Rear Side Enlarged 3. CONNECTIONS Standard Connection 8 7 1 2 3 456 4. SETTING 4-1. Video Scanning Modes Partial Scanning OFF (All pixels scanning) Rear Page 8 4-2. Electronic Shutter * The shutter will be OFF when partial scanning is ON. *The electronic shutter cannot be used in the reset-restart operation. This can be set with the MODE SELECT switch located on the rear panel. Description of the MODE SELECT Switch 4-3. Reset Restart External VD interval: more than 1V Rear Long Term Exposure 10 Page Page NOTE External Sync Operation 5. Input Output Signal Specifications HD/VD Output Amplitude Specifications VIDEO INDEX Output Specifications VD Input Specifications HD Input Specifications External HD/VD Input Phase Specifications 9H 525H 286s HD Dummy pixels 6. CCD Output Waveform Timing Chart Horizontal Output Waveform Timing Chart Vertical Output Waveform Timing Chart 7. EXTERIOR VIEW IK-53V IK-52V 12 [0.47"] 4-R1 8. SPECIFICATIONS 20 Spectral Sensitivity Characteristics (Representative Values) (Including lens characteristics, excluding light source characteristics) IK-53V IK-52V