System Specifications | Altec Lansing ACS33BW specification

SYSTEM SPECIFICATIONS*

Altec Lansing’s superior sound comes from our patented Dynamic EQ technology, which utilizes custom-built, high-fidelity drivers, state-of-the-art equalization circuitry, and a harmonious mix of the following specifications:

Sound Pressure Level (SPL):	103 dB	System Response:	70 Hz – 18 kHz (-10 dB)

Total Continuous Power:	21 Watts RMS	Signal to Noise Ratio
		@ 1 kHz input:	> 65 dB
• Front Speakers:	5 Watts/channel @ 4 ohms	@ 1 kHz input:	> 65 dB
• Front Speakers:	5 Watts/channel @ 4 ohms
	@ 10% THD @ 150 Hz – 20 kHz	Drivers (per satellite):	One 3" full-range driver
	2 Channels Loaded
	2 Channels Loaded	Subwoofer:	One 4" woofer
		Subwoofer:	One 4" woofer
• Subwoofer:	11 Watts @ 4 ohms
	@ 10% THD @ 30 – 150 Hz
	Single Channel Loaded

*Power rating conforms to FTC Amplifier Rule #16 C.F.R. Part 432.

TROUBLESHOOTING

SYMPTOM	POSSIBLE PROBLEM	SOLUTION
No LEDs are lit.	Power isn’t turned on.	Turn the VOLUME knob on the right speaker clockwise. An LED will light next
		to the knob when the power is ON.

	AC power cord isn’t connected to the wall outlet.	Check to see if the “Power On” LED is illuminated on the right satellite. If not,
		connect AC power.

	Surge protector (if used) isn’t powered on.	If the AC power cord is plugged into a surge protector, make sure the surge
		protector is switched on.

	Wall outlet not functioning.	Plug another device into the wall outlet (same jack) to verify the wall outlet
		is working.

No sound	Power isn’t turned on.	Verify the AC power cord is plugged into the wall outlet.
from one or
from one or		Turn the VOLUME knob on the right speaker clockwise. An LED will light next
more speakers.
		to the knob when the power is ON.

	Volume is set too low.	Turn the VOLUME knob clockwise to raise the volume.

		Check volume level on the computer sound card or alternate audio source
		device, and set at mid-level.

	3.5mm stereo cable isn’t connected to audio source.	Check plug connections on the audio source. Make sure the signal cables are
		inserted firmly into the correct jacks.

	3.5mm stereo cable is connected to wrong output on	Make sure the 3.5mm stereo cable is connected and fully inserted into the
	audio source.	“line-out,” “audio-out,” or the headphone jack of the audio source.

	Problem with audio source device.	Test the speakers on another audio device. Remove the 3.5mm stereo cable
		from the audio source device and connect it to “line-out,” “audio-out,” or the
		headphone jack of another audio source.

Crackling sound	Bad connection.	Check all cables. Make sure they are connected to “line-out” or “audio-out”
from speakers.		jack on your sound card or other audio source — NOT “speaker-out.”

	Volume level in computer operating system is set	Check the computer operating system volume level and decrease it if necessary.
	too high.

	A problem with your audio source device.	Unplug the stereo cable from the audio source. Then plug it into the
		headphone jack of an alternate audio source (e.g., Walkman, Discman or
		FM radio).

ACS33BW specifications

The Altec Lansing ACS33BW is a compact yet powerful speaker system designed to deliver high-quality audio for music enthusiasts and casual listeners alike. Known for its sleek design and excellent performance, the ACS33BW offers a blend of modern aesthetics and classic audio fidelity, making it an appealing choice for various users.

One of the standout features of the ACS33BW is its three-piece speaker setup, which includes two satellite speakers and a robust subwoofer. This configuration allows for a rich soundstage and enhances the overall listening experience. The satellite speakers are designed to produce clear highs and mid-range frequencies, while the subwoofer delivers deep, throaty bass, making it ideal for genres ranging from classical to rock and electronic music.

The ACS33BW utilizes advanced audio technologies that contribute to its impressive sound performance. The speaker system features a high-efficiency amplifier that ensures powerful sound output without significant distortion, regardless of the volume level. Additionally, the speakers incorporate magnetically shielded drivers, which prevent interference with other electronic devices, ensuring a clean and uninterrupted listening experience.

For connectivity, the Altec Lansing ACS33BW is equipped with a standard 3.5mm audio input, making it compatible with various devices, including smartphones, tablets, and computers. This versatility allows users to easily connect their preferred audio sources and enjoy their favorite tracks with minimal hassle. The user-friendly design includes easy-to-reach volume and bass controls, accommodating personal sound preferences and room acoustics.

Durability is another characteristic of the ACS33BW. The build quality is robust, ensuring that the speakers can withstand everyday use while maintaining their performance. The stylish wood finish not only adds an elegant touch to any setting but also positively contributes to sound acoustics.

In summary, the Altec Lansing ACS33BW speaker system is a remarkable choice for those seeking an exceptional audio experience without breaking the bank. Its combination of powerful sound output, sophisticated audio technologies, and elegant design makes it a worthy addition to any home or office setup. Whether for casual listening or immersive audio enjoyment, the ACS33BW is well-equipped to meet the demands of modern audio consumption.