N-Strike LONGSHOT CS-6™ To Assemble:
USING LONGSHOT CS-6
1.Insert Bolt into mechanism as shown and plug onto other end of bolt.
3.Slide/snap Sight onto Blaster. Lock into place.
5.Attach extension to main unit by sliding extension into place...
7. Bipod flips down.
2. Stock extends.
4.Insert grip and slide back to snap into place.
6. ...and twisting 90 degrees to lock.
8.Load Clip by inserting 1 STREAMLINE DART™ at a time and pushing down. Be sure to insert darts in direction indicated on the Clip. Each Clip can hold up to 6
STREAMLINE DARTS.
1.Pull Bolt Mechanism back. Ready Indicator should change from black to red. Slide Clip into place.
2. Slide Bolt Mechanism forward. | 3. Pull Trigger 2 to launch |
| STREAMLINE DART™. |
4.Pull Bolt Mechanism all the way back, and slide forward to load another dart.
other side of blaster |
5.To reload, pull Bolt Mechanism back and press Clip Locking Button to remove Clip.