CUSTOMER RESPONSIBILITIES
SERVICE RECORDS | SCHEDULE |
Fill In dates as you com-
plete regular service | After | Before [ |
| Every | Every |
|
| |
First 2 | Each | As | 10 | 25 | Each | Before | ||
| ||||||||
| hours | Use | Needed | Hours | Hours | Season | Storage |
SERVICE DATES
Check | Engine Oil Level ' |
| p,4 | pJ |
Change | Engine Oil | _ | Jr_ | /_ |
Tighten All Screws and Nuts | _ | _ |
| |
Check Traction Clutch Cable |
|
|
| |
Adjustment (See Cable Adjustment) | PJ |
|
| |
Replace Spark Plug |
| pJ | pJ | |
_justDAveBolts | ii' | _, | _' | |
Lubricate All Pivot Points |
| _ |
| |
LubricateAugerShaft(SeeShear |
|
| p,_ | |
Bolt Replacement) |
|
|
| |
LubricateDiscDrivePlateZerk |
| f,_ |
| |
DrainFuel |
|
| f_ | |
Check Auger ClutchCable |
|
|
| |
Adjustment (See Cable Adjustment) | P'/ |
| PJ | |
GENERAL RECOMMENDATIONSLUBRICATION CHART
The warranty on this snow thrower does not cover items that have been subjected to operator abuse or negli- gence. To receive full value from the warranty, operator must maintain snow thrower as instructed in this manual.
Some adjustments will need to be made periodically to propedy maintain your snow thrower.
All adjustments in the Service and Adjustments section of this manual should be checked at least once each
season.
AFTER FIRST USE
•Check for any loose or damaged parts.
•Tighten any loose fasteners,
•Check and maintain the auger.
•After each use, remove all snow and slush off the snow thrower to prevent freezing of auger or controls.
•Check contrc!s to make sure they are functioning properly.
•If any parts are worn or damaged, replace immedi- ately.
17
