JVC MX-GB5C Programming the Playing Order of the Tracks --Program Play, To modify the program

Continued

Programming the Playing Order of the Tracks —–Program Play

You can arrange the order in which the tracks play before you

start playing. You can program up to 32 tracks.

•To use Repeat play (see page 19) for Program play, press REPEAT after starting Program play.

Playback and recording for Program play are not available to MP3 discs on this unit

There may be a malfunction in case that you try to do such playback or recording.

If a malfunction occurs, unplug the AC power cord and then plug it back in.

On the unit ONLY:

1 Load CDs.

•If the current playing source is not the CD player, press CD 6, then 7before going to the next step.

2 Press PROGRAM so that “PROGRAM” appears on the display.

The PRGM (program) indicator also lights up on the display.

•All Disc play is selected automatically. You cannot select One Disc play for Program play.

TRACK	P R G M
WOOFER	ALL DISC

•If a program has been stored in memory, the program is called up.

3 Press one of the disc number buttons (CD1, CD2, and CD3)

to select the disc number you want to play.

Disc number		Program step number
	TRACK		P R G M

Track number

4 Press ¢or 4to select the track number, then press SET/DISPLAY.

Each time you select a track and press SET/DISPLAY, the selected

track number is added to the track number indicator.

• You can select up to the 99th track on each disc.

TRACK P R G M

5 Program other tracks you want.

•To program tracks from the same disc, repeat step 4.

•To program tracks from a different disc, repeat steps 3 and 4.

6 Press CD 6.

The tracks are played in the order you have programmed.

To stop during play, press 7.

To exit from Program play, press PROGRAM again before or after play so that the unit enters All Disc play. (The program you have made is stored in memory until you turn off the unit, eject the carrousel, or erase the program.)

• Program play is also canceled when you press CD 0.

To modify the program

Before playing, you can erase the last programmed track shown on the display by pressing CANCEL/DEMO.

•Each time you press the button, the last programmed track is erased from the program.

To add tracks in the program before play, simply select the disc numbers and/or track numbers you want to add by following steps 3 and 4 of the programming procedure.

To check the program before play, perform the following

procedure:

1Press RANDOM while Program play is stopped.

2Press ¢or 4.

The programmed tracks appear on the display in the programmed (or reverse) order.

•Pressing CD 6starts Program play from the first track of the program.

If you want to add tracks in the program after checking the program

Press PROGRAM twice, then add tracks by following steps 3 and 4 of the programming procedure.

To erase the entire program, press 7while Program play is

stopped.

•Turning the power off or ejecting the carrousel will also erase the stored memory.

If you try to add another track when 32 tracks are already programmed

“FULL” appears on the display and the 32nd track is replaced by the newly added track.

If you have programmed a track from an empty tray, or a track number that does not exist on the disc

Such program steps will be skipped.

18