JVC LET0021-001A, RX-530RBK Connecting the Power Cord, Putting Batteries in the Remote Control

Page 14

English

Connecting the Power Cord

Before plugging the receiver into an AC outlet, make sure that all connections have been made.

1. Plug the power cord into an AC outlet.

POWER

2. Press POWER to set it in the _ON position.

The STANDBY lamp lights up. A small amount of power is always consumed.

_ON ÑOFF

To shut off the power completely:

Press POWER to set it in the ÑOFF position.

Keep the power cord away from the connecting cables for the TV, VCR, and antenna. The power cord may cause noise or screen interference. We recommend that you use a coaxial cable to connect the antenna, since it is well-shielded against interference.

The difference between the POWER switch and the STANDBY/ON button

The POWER switch is the mains supply switch, allowing the receiver to connect to the mains supply. To shut off the power completely, press the POWER switch to set it in the ÑOFF position.

The STANDBY/ON button is a functional on/off (standby) switch, and does not disconnect the receiver from the mains supply. A small amount of power is consumed even in standby mode for the receiver to accept signals from the remote control.

Note:

The preset settings such as preset channel and sound adjustment may be erased in the following cases:

When you press POWER to set it in the ÑOFF position.

When you unplug the power cord.

When a power failure occurs.

CAUTIONS:

Do not touch the power cord with wet hands.

Do not pull on the power cord to unplug the receiver. When unplugging the receiver, always grasp the plug itself so as not to damage the cord.

Putting Batteries in the Remote Control

Before using the remote control, put the two supplied batteries in first. When using the remote control, aim the remote control directly at the remote sensor on the receiver.

1.On the back of the remote control, press down on the battery cover and slide it out.

2.Insert batteries. Make sure to observe the proper polarity: (+) to (+) and (–) to (–).

3.Slide the cover.

R6P (SUM-3)/AA (15F)

If the range or effectiveness of the remote control decreases, replace the batteries. Use two R6P (SUM-3)/ AA (15F) type dry-cell batteries.

CAUTIONS:

Follow these precautions to avoid leaking or cracking cells:

Place batteries in the remote control so they match the polarity indicated: (+) to (+) and (–) to (–).

Use the correct type of batteries. Batteries that look similar may differ in voltage.

Always replace both batteries at the same time.

Do not expose batteries to heat or flame.

Page 9

Image 14
Contents AUDIO/VIDEO Control Receiver LET0021-001APer I’ltalia English Deutsch Français Nederlands Español Italiano Voorzichtig -- Power en STANDBY/ON RX-530RBK Table of Contents Front Panel Switches, Buttons and ControlsRemote Control Getting Started Before InstallationChecking the Supplied Accessories FM Antenna Connections Connecting the FM and AM MW/LW AntennasUsing the Supplied FM Antenna AM MW/LW Antenna ConnectionsConnecting the rear and center speakers Connecting the SpeakersConnecting the front speakers Case 3 When you connect front and rear speakers Case 1 When you connect only front speakersCase 2 When you connect front speakers and a center speaker About the speaker impedance of the speakersAudio component connections Connecting Audio/Video ComponentsConnecting the subwoofer speaker Audio Components Video ComponentsVideo component connections VCRPlug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control Press Power to set it in the on positionSelecting the Source to Play Turning the Power On and Off StandbyBasic Operations Mute appears on the display and the volume turns off Adjusting the VolumeFrom the remote control only Selecting the Front SpeakersTo listen with only headphones Listening with HeadphonesHeadphones and your hearing Recording a SourceListening at Low Volume Loudness Basic SettingsAdjusting the Front Speaker Output Balance Using the Sleep TimerLarge Selecting the Center Speaker SizeLarge Small no SmallTo cancel the One Touch Operation function Using the One Touch OperationTo store the sound settings Press ONE Touch Operation One Touch OperationStoring the preset stations Tuning in Stations ManuallyUsing Preset Tuning Receiving Radio BroadcastsFrom the remote control Press FM/AM Tuning in a Preset StationTo cancel a stored preset station Press 10 keys to select a preset channel numberFM Auto Selecting the FM Reception ModeUsing the RDS Radio Data System to Receive FM Stations FM MonoPS PTY RT Frequency What Information Can RDS Signals Provide?Searching for a Program by PTY Codes Info NewsAffairs SportCase Switching to a Broadcast Program of Your Choice TemporarilyNews Info TA/NEWS TA/NEWS/INFO TA/INFO Using the Preset SEA Modes Selecting Your Favorite SEA ModePress Preset to select the effect level Movie SPORTS2 JazzWhat is surround? Using the Surround ProcessorUsing JVC’s Hall Surround Prologic 3CHLOGIC HallDelay Delay 1 Delay 2 DelayDelay 1 Delay 2 Delay Press Rear +/- to adjust the rear speaker output levelSpeaker arrangements for Dolby Surround This casePreparing for Dolby Surround Wide Normal PhantomIf necessary, adjust the speaker output balance as follows Left front Center Right front Speaker Rear speakersPress Test to start checking the speaker output balance Press Test again to stop the test toneUsing Dolby Surround LOGIC, Hall lights up on the displayAutomatic Source Selection Compu Link Remote Control SystemRemote Control through the Remote Sensor on the Receiver Synchronized RecordingUsing the Remote Control PTY Search Display Troubleshooting Problem Possible Cause SolutionSpecifications AmplifierGeneral FM tuner IHFAM MW/LW tuner EN, GE, FR, NL, SP, IT 0497OFYOTKJEM

LET0021-001A, RX-530RBK, 0497OFYOTKJEMEN specifications

JVC has long been a prominent name in the world of audio and visual technology, and among its versatile product offerings are the JVC 0497OFYOTKJEMEN, RX-530RBK, and LET0021-001A. These devices exemplify JVC's pursuit of quality, performance, and innovation, catering to diverse consumer needs.

The JVC 0497OFYOTKJEMEN is a cutting-edge audio product that stands out for its impressive sound clarity and dynamic range. This model boasts advanced digital sound processing technology, offering users rich audio experiences whether they're listening to music or watching movies. The integration of Bluetooth technology allows for seamless connectivity with smartphones and other devices, providing convenience and flexibility.

Next up, the RX-530RBK is a powerful receiver that delivers a top-notch audio experience. This receiver supports various audio formats, enhancing versatility for both music enthusiasts and home theater aficionados. Equipped with multiple HDMI inputs, it makes connecting various devices simple and efficient, allowing for easy setup and configuration. The RX-530RBK also features a robust equalization system, giving users greater control over sound customization to suit their preferences, making it an ideal choice for tailored listening experiences.

The LET0021-001A represents JVC’s commitment to portable and easy-to-use technology. This model is designed for efficiency, enabling users to enjoy high-quality sound on the go. With its lightweight and compact design, the LET0021-001A is perfect for outdoor events or travel, ensuring that high fidelity audio is always within reach. Moreover, this device includes a long-lasting battery, which provides hours of uninterrupted playback, making it convenient for extended use without frequent recharging.

Each of these JVC products incorporates modern technologies that exemplify thoughtful design choices. With a focus on reliability and user satisfaction, JVC ensures that consumers have access to audio solutions that not only meet but exceed their expectations. In summary, whether you seek home entertainment solutions or portable audio devices, JVC's innovative products like the 0497OFYOTKJEMEN, RX-530RBK, and LET0021-001A offer compelling features, ensuring that quality sound is always at your fingertips.