Hasbro 20574/20570 Time to harden, remove, Meteor MUD disc, Side for 3-5 minutes From Meteor MUD

7 Place METEOR MUD™ compound disc on top of filled alien impression, and gently pat it down.

8	Let alien sit for 3-5 minutes to give
	LUNAR LAVA™ gel time to harden.

9	After allowing LUNAR LAVA™
	time to harden, remove
	METEOR MUD™ disc...

Use the plastic knife to cut away any excess LUNAR LAVA™ from alien.

• TIP: If you’d like to make
another alien while the
first one is	hardening,
use the plastic knife to
carefully remove the filled
METEOR MUD™ from the			• TIP: For an alien with
chamber. Place off to the			gooey guts, remove alien
side for 3-5 minutes.			from METEOR MUD™
			after 3 minutes. To create
			a solid alien, leave it in
			the METEOR MUD™ for
			the full 5 minutes.
...and lift alien out of the
METEOR MUD™ impression.		ALIEN	ACTIVITIES
		• Put aliens in the pods so they can
		“fly” the spaceship.
		• Dissect aliens with the plastic knife
		and tweezers!
		• Flatten them with the roller (really
		fun when they have gooey guts!).
		Use your imagination to dream up more
		adventures and experiments for your aliens!
	ATMOSPHERE ALERT
	These aliens are not from this planet, so they cannot “live” long in
• NOTE: METEOR MUD™	our atmosphere. When they are exposed to oxygen for too long, they
is reusable! To make more	shrivel up and become hard and dry. They will “live” longer if you keep
aliens, repeat steps 1–9.	them in the spaceship pods or an airtight container (not included).