ASSEMBLY:
Please follow assembly instructions in proper order for best results.
1: Turn stadium halves upside down. Slide connecting snaps into slots on ONE STADIUM HALF ONLY (NOT both halves!). Make sure they SNAP into place.
3b: Slide stadium halves together, sliding connecting snaps and connecting plugs all the way into slots on other stadium half.
2a: Using screwdriver, turn locks to unlocked position (arrow on lock points toward stadium center).
2b: Slide connecting plugs all the way into side slots on one stadium half as shown.
2c: Turn locks clockwise to locked position (arrow on lock points away from stadium center).
3a: Using screwdriver, turn locks on other half of stadium to unlocked position (arrow on lock points toward stadium center).
3c: Turn locks clockwise to locked position (arrow on lock points away from stadium center).
flap
switch
4:Attach leg with flap to battery compartment end of stadium (slide tabs on leg into slots on stadium). To attach remaining leg, line up cover with switch, and attach leg to stadium (slide tabs on leg into slots on stadium).
lever | center supports |
5:Snap center supports into holes in stadium. Attach lever to post on end of leg with flap.