Mode II - Pro Driver
Reset Switch
Wheel
ON/OFF
Button
•Turn the control tower power on to hear sound effects each time the car drives over the starting ramp.
•Be sure the reset switch on the control tower is set to the on position 
.
•Press the ON/OFF button on the front of the control tower to turn power on. While power is on, the button will not light because the track is not connected to the control tower in this mode.
Hint: If the car hasn’t driven past the control tower for a few minutes, the tower turns off automatically. Press the ON/OFF button again for power.
Forward
Reverse
•Press the forward button 
on the remote controller.The car moves forward.
•Press the reverse button 
on the remote controller. The car moves backward.
•Use the wheel on the remote controller to maneuver around the track or past obstacles.
Note: The range of the remote controller to the car is 15 feet (with no obstructions).
16