Reset/Auto-On Button Auto−On Lens Assembly

Reset/Auto-On Button (Auto−On Lens Assembly)

Press the Reset button to check lens operation. If working properly, the lens will automatically darken twice and then return to the light state.

.The lens will Auto Off (light state − No. 4) 15 − 20 minutes after the last arc. It is not necessary to press the Reset button to resume welding.

On/Auto-Off Button (Manual-On Lens Assembly)

Locate the ON button and press ON to weld, the lens will automatically darken twice and then return to the light state, the helmet is then ready to weld.

Note: The lens will Auto-Off (clear state − No. 4) after 15−20 minutes after the last arc. It will be necessary to press the ON button to resume welding.

Variable Shade Control (No. 9 − No. 13)

Use the shade chart below to select proper shade control setting based on your welding process. We recommend starting at shades 12 or 13 and adjust lighter based on the welding application and personal preference.

Application Welding	Arc Current in Amperes	Protective Shade No.

Stick Electrodes	Less than 40	9
	40−80	10
	80−175	11
	175−300	12
	300−500	13

MIG	Less than 100	10
	100−175	11
	175−300	12
	300−500	13

Gas Tungsten Arc Welding	Less than 50	10
(TIG)	50−100	11
	100−200	12
	200−400	13

Air Carbon	Less than 500	12
	500−700	13

Plasma Arc Cutting	60−150	11
	150−250	12
	250−400	13

Plasma Arc Welding	Less than 50	9
	50−200	10
	200−400	12

Page 4