JVC SP-UXH100, UX-H100, CA-UXH100 manual Troubleshooting, Specifications

Page 25
6 Ω – 16 Ω

Troubleshooting

If you are having a problem with your unit, check this list for a possible solution before calling for service.

If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service.

Symptom

Possible Cause

Action

Power does not come on.

The power cord is not connected to an

Insert the plug into the socket.

AC outlet.

 

 

 

 

 

No sound is heard.

•

Connections are incorrect or loose.

 

•

A pair of headphones is connected.

 

•

MP3 disc is recorded with “packet

 

 

 

writing.”

 

 

 

 

•Check all connections and make corrections. (See pages 6 and 7.)

•Unplug the headphones from the PHONES jack.

•It cannot be played. Replace the disc.

Hard to listen to broadcasts because of

•

Antennas are disconnected.

noise.

 

 

 

 

•

The AM loop antenna is too close to

 

 

 

the unit.

 

•

The FM antenna is not properly

 

 

 

extended and positioned.

 

 

 

The disc does not play.

The disc is upside down.

 

 

 

Specific files (tracks) on an MP3 disc are

Files other than MP3 are included in the

not played.

disc.

 

 

 

Impossible to record.

Small tabs on the back of the cassette are

 

removed.

 

 

 

 

•Reconnect the antenna correctly and securely.

•Change the position and direction of the AM loop antenna.

•Extend FM antenna and orient to the best reception position.

Put the disc in with the label side up.

They cannot be played.

Cover the holes with adhesive tape.

Operations are disabled.

Unable to operate the unit by the remote control.

The built-in microprocessor has malfunctioned due to external electrical interference.

•The path between the remote control and the remote sensor on the unit is blocked.

•The batteries are exhausted.

•You are using the remote control too far from the unit.

Unplug the AC power cord then plug it back in.

•Remove the obstruction.

•Replace the batteries. (See page 6.)

•Signals cannot reach the remote sensor. Move closer to the unit.

Specifications

Design and specifications are subject to change without notice.

Amplifier Section—CA-UXH100

Output Power:

10 W per channel, min. RMS, driven into 6 Ω at 1 kHz, with no more than 10% total harmonic distortion (IEC 268-3)

Speakers/Impedance:

Tuner

FM tuning range:

 

FM 100 kHz intervals:

87.5 MHz—108.0 MHz

FM 50 kHz intervals:

87.50 MHz—108.00 MHz

AM tuning range:

 

AM 10 kHz intervals:

530 kHz—1 710 kHz

AM 9 kHz intervals:

531 kHz—1 710 kHz

CD player

Dynamic range:

85 dB

Signal-to-noise ratio:

85 dB

Wow and flutter:

Immeasurable

Cassette deck

Frequency response:

 

Normal (type I):

100 Hz—10 000 Hz

Wow and flutter:

0.35 % (WRMS)

General

Power requirement:

AC 110V–127V/220V–240 V ,

 

adjustable with the voltage selector,

 

50 Hz/60 Hz

Power consumption:

38 W (at operation)

 

2 W (on standby)

Dimensions (W/H/D) (approx.):

 

144 mm x 255 mm x 277 mm

Mass (approx.):

2.9 kg

Supplied accessories

See page 6.

Speaker Section—SP-UXH100

Type:

Full range Bass-reflex type

Speakers:

10 cm cone x1

Power handling capacity: 10 W

Impedance:

6 Ω

Frequency range:

100 Hz to 15 kHz

Dimensions (W/H/D) (approx.):

 

130 mm x 257 mm x 151 mm

Mass (approx.):

1.5 kg each

22

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Micro Component System Page SP-UXH100 CA-UXH100 SP-UXH100 Introduction PrecautionsAbout This Manual Contents Top view Main UnitFront view Main unit Display window Display windowLocation of the Buttons and Controls Remote ControlConnections UnpackingRelease your finger from the clamp To connect speakersConnecting Other Equipment Adjusting the Voltage SelectorGetting Started Connect the supplied AM loop antenna to AM Loop terminalTurning On the Power Setting the ClockBasic and Common Operations Adjusting the Tone Bass/Treble Adjusting the VolumeSelecting the Source Fade MutingTuning in to a Station Setting the Tuner Interval SpacingListening to FM and AM Broadcasts Tuning in to a Preset Station Presetting StationsPlaying Back Discs When playing CD-Rs or CD-RWsPlaying Back the Entire Disc-Normal Play Press 0 Open on the unitBasic Disc Operations On the remote control only Place a discProgramming the Track Playing Order Program Play Repeat to program other tracks you want Press CD 3/8Repeating Tracks-Repeat Play Playing at Random-Random PlayDisplaying the Remaining Time during Playback Playing Back a Tape Playing Back TapesOn the unit only Press &/ stop/cassette holder open Press # playSet the volume level to the minimum position Press AUX Using an External EquipmentListening to the External Equipment Recording on a Tape RecordingPress ‡ recording To protect your recordingsPress 7 to stop the disc playback Recording Discs Disc Synchronized RecordingTo stop recording, press Using the Daily Timer Using the TimersPress SET to set the on-time you want Unit to turn onOn the remote control only Press Sleep Using the Sleep TimerHow the Sleep Timer actually works To deactivate the timer temporarilyCleaning the unit MaintenanceHandling discs Handling cassette tapesSpecifications TroubleshootingUX-H100 Micro Component System Sistemas DE Microcomponentes Sistema DE Micro Componentes PRECAUCIÓN-Botón STANDBY/ON Precaución SP-UXH100 CA-UXH100 SP-UXH100 Para Produtos LASER, Importante English Contents Main Unit Prgm Sound REC Location of the Buttons and Controls Unpacking Connections Getting Started Basic and Common Operations Selecting the Source Press 10 or 9 to select Presetting Stations Playing Back Discs Basic Disc Operations Playing at Random-Random Play On the unit only Press Tape Using an External Equipment Recording Recording Discs Disc Synchronized Recording Daily 2 Timer Daily 3 Timer Using the Sleep Timer Maintenance Symptom Possible Cause Action SpecificationsImportante para la línea de la red CA LVT1190-008A Page SP-UXH100 CA-UXH100 SP-UXH100 Introduction Contents Front view Sleep Location of the Buttons and Controls Getting Started Getting Started Basic and Common Operations Selecting the Source Listening to FM and AM Broadcasts Presetting Stations Playing Back Discs Basic Disc Operations Playing at Random-Random Play Playing Back Tapes Using an External Equipment Recording Recording Discs Disc Synchronized Recording Using the Timers Using the Sleep Timer Maintenance Specifications EN, CS 0304AIMMDWBET Victor Company of JAPAN, Limited

CA-UXH100, SP-UXH100, UX-H100 specifications

The JVC SP-UXH100, UX-H100, and CA-UXH100 are an impressive trio of compact audio systems designed to deliver powerful sound while saving on space. Ideal for music enthusiasts who appreciate quality without the bulk, these systems cater to diverse audio needs in various settings, whether it's at home, in the office, or during social gatherings.

One of the standout features of the JVC UX-H100 series is its robust sound performance. Utilizing advanced speaker technologies, this audio system delivers crystal-clear highs, rich midrange, and deep bass, allowing listeners to fully immerse themselves in their favorite tracks. The inclusion of a powerful built-in amplifier ensures that audio output remains distortion-free, even at high volumes.

The UX-H100 and CA-UXH100 models are particularly versatile, with multiple playback options that cater to varying preferences. These systems are equipped with CD players, FM/AM tuners, and auxiliary inputs, enabling users to enjoy their music from a variety of sources. The USB port is a modern touch, allowing playback of digital music files directly from USB flash drives. Compatibility with different formats adds another layer of convenience, making it easy to enjoy a wide range of audio content.

Design-wise, the JVC SP-UXH100 series emphasizes aesthetics as much as functionality. Its sleek and compact design fits seamlessly into any space, whether on a shelf or as part of a larger entertainment setup. The intuitive user interface and included remote control contribute to a hassle-free user experience, allowing easy access to all features without the need to get up from the couch.

Additionally, the JVC systems come equipped with features like preset equalizers, allowing users to customize their listening experience according to personal preferences or the type of music being played. The built-in clock and programmable timer offer added convenience for users who wish to set their audio system to turn on or off at specific times.

Overall, the JVC SP-UXH100, UX-H100, and CA-UXH100 present an appealing combination of performance, versatility, and design, making them an excellent choice for anyone in search of a reliable and stylish audio solution. Whether for casual listening or a lively gathering, these compact systems stand out as reliable companions that prioritize sound quality and user experience.
Top Page Image Contents