JVC SP-UXH100, UX-H100, CA-UXH100 manual Listening to FM and AM Broadcasts

Page 67

Listening to FM and AM Broadcasts

Continued

 

 

English

Setting the Tuner Interval Spacing

You can select 10 kHz or 9 kHz apart for the AM tuner interval spacing and 100 kHz or 50 kHz apart for the FM tuner interval spacing.

•The interval settings of AM and FM change together.

AM 10 kHz, FM 100 kHzÔAM 9 kHz, FM 50 kHz

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start again from step 2.

On the remote control ONLY:

1

Press STANDBY/ON

to turn off

STANDBY/ON

 

the unit (standby).

 

 

2

Press and hold 7 for a few seconds.

 

 

The current interval setting appears on the

 

 

display.

 

 

 

AM 10 kHz, FM 100 kHz

AM 9 kHz, FM 50 kHz

Tuning in to a Station

1 Press FM/AM to select either “FM” FM/AM or “AM.”

The unit automatically turns on and tunes in to the previously received station—either FM or AM.

•Each time you press the button, the band alternates between FM and AM.

FM 50 kHz interval

FM 100 kHz interval

2 Press and hold ¢ or 4 (or UP ¢ or DOWN 4 on the unit) for more than 1 second.

• ¢ (UP ¢):

Increases the frequencies.

•4 (DOWN 4): Decreases the frequencies.

The unit starts searching for stations and stops when a station of sufficient signal strength is tuned in.

•If an FM program is broadcast in stereo, the ST (stereo) indicator lights up on the display (only when the reception is good).

3 Press 10 or 9 to select the

 

 

To stop during searching, press ¢ or 4 (or UP ¢ or

1

2

3

interval setting for your area.

 

 

DOWN 4 on the unit).

4

5

6

 

•10: Sets the interval to 10 kHz (AM)

and 100 kHz (FM).

7

8

9

• 9: Sets the interval to 9 kHz (AM)

10

+10

 

and 50 kHz (FM).

 

 

 

 

The new interval setting appears on the display for a few seconds.

When you repeatedly press ¢ or 4 (or UP ¢ or DOWN 4 on the unit)

The frequency changes step by step.

To change the FM reception mode

When you change the setting

The preset stations are erased. You will need to preset the stations again. (See page 11.)

On the remote control ONLY:

When an FM stereo broadcast is hard to receive or noisy,

press FM MODE so that the MONO indicator lights up on the display. Reception will improve.

To restore the stereo effect, press FM MODE again so that the MONO indicator goes off. In stereo mode, you can hear stereo sound when a stereo program is broadcast.

•Changing the station also cancels the MONO mode.

10

Page 66 Page 68
Image 67
Page 66 Page 68
Contents Micro Component System Page SP-UXH100 CA-UXH100 SP-UXH100 Introduction PrecautionsAbout This Manual Contents Top view Main UnitFront view Main unit Display window Display windowLocation of the Buttons and Controls Remote ControlTo connect speakers UnpackingConnections Release your finger from the clampConnect the supplied AM loop antenna to AM Loop terminal Adjusting the Voltage SelectorConnecting Other Equipment Getting StartedTurning On the Power Setting the ClockBasic and Common Operations Fade Muting Adjusting the VolumeAdjusting the Tone Bass/Treble Selecting the SourceTuning in to a Station Setting the Tuner Interval SpacingListening to FM and AM Broadcasts Tuning in to a Preset Station Presetting StationsPress 0 Open on the unit When playing CD-Rs or CD-RWsPlaying Back Discs Playing Back the Entire Disc-Normal PlayRepeat to program other tracks you want Press CD 3/8 On the remote control only Place a discBasic Disc Operations Programming the Track Playing Order Program PlayRepeating Tracks-Repeat Play Playing at Random-Random PlayDisplaying the Remaining Time during Playback Press # play Playing Back TapesPlaying Back a Tape On the unit only Press &/ stop/cassette holder openSet the volume level to the minimum position Press AUX Using an External EquipmentListening to the External Equipment To protect your recordings RecordingRecording on a Tape Press ‡ recordingPress 7 to stop the disc playback Recording Discs Disc Synchronized RecordingTo stop recording, press Unit to turn on Using the TimersUsing the Daily Timer Press SET to set the on-time you wantTo deactivate the timer temporarily Using the Sleep TimerOn the remote control only Press Sleep How the Sleep Timer actually worksHandling cassette tapes MaintenanceCleaning the unit Handling discsSpecifications TroubleshootingUX-H100 Micro Component System Sistemas DE Microcomponentes Sistema DE Micro Componentes PRECAUCIÓN-Botón STANDBY/ON Precaución SP-UXH100 CA-UXH100 SP-UXH100 Para Produtos LASER, Importante English Contents Main Unit Prgm Sound REC Location of the Buttons and Controls Unpacking Connections Getting Started Basic and Common Operations Selecting the Source Press 10 or 9 to select Presetting Stations Playing Back Discs Basic Disc Operations Playing at Random-Random Play On the unit only Press Tape Using an External Equipment Recording Recording Discs Disc Synchronized Recording Daily 2 Timer Daily 3 Timer Using the Sleep Timer Maintenance Symptom Possible Cause Action SpecificationsImportante para la línea de la red CA LVT1190-008A Page SP-UXH100 CA-UXH100 SP-UXH100 Introduction Contents Front view Sleep Location of the Buttons and Controls Getting Started Getting Started Basic and Common Operations Selecting the Source Listening to FM and AM Broadcasts Presetting Stations Playing Back Discs Basic Disc Operations Playing at Random-Random Play Playing Back Tapes Using an External Equipment Recording Recording Discs Disc Synchronized Recording Using the Timers Using the Sleep Timer Maintenance Specifications EN, CS 0304AIMMDWBET Victor Company of JAPAN, Limited

CA-UXH100, SP-UXH100, UX-H100 specifications

The JVC SP-UXH100, UX-H100, and CA-UXH100 are an impressive trio of compact audio systems designed to deliver powerful sound while saving on space. Ideal for music enthusiasts who appreciate quality without the bulk, these systems cater to diverse audio needs in various settings, whether it's at home, in the office, or during social gatherings.

One of the standout features of the JVC UX-H100 series is its robust sound performance. Utilizing advanced speaker technologies, this audio system delivers crystal-clear highs, rich midrange, and deep bass, allowing listeners to fully immerse themselves in their favorite tracks. The inclusion of a powerful built-in amplifier ensures that audio output remains distortion-free, even at high volumes.

The UX-H100 and CA-UXH100 models are particularly versatile, with multiple playback options that cater to varying preferences. These systems are equipped with CD players, FM/AM tuners, and auxiliary inputs, enabling users to enjoy their music from a variety of sources. The USB port is a modern touch, allowing playback of digital music files directly from USB flash drives. Compatibility with different formats adds another layer of convenience, making it easy to enjoy a wide range of audio content.

Design-wise, the JVC SP-UXH100 series emphasizes aesthetics as much as functionality. Its sleek and compact design fits seamlessly into any space, whether on a shelf or as part of a larger entertainment setup. The intuitive user interface and included remote control contribute to a hassle-free user experience, allowing easy access to all features without the need to get up from the couch.

Additionally, the JVC systems come equipped with features like preset equalizers, allowing users to customize their listening experience according to personal preferences or the type of music being played. The built-in clock and programmable timer offer added convenience for users who wish to set their audio system to turn on or off at specific times.

Overall, the JVC SP-UXH100, UX-H100, and CA-UXH100 present an appealing combination of performance, versatility, and design, making them an excellent choice for anyone in search of a reliable and stylish audio solution. Whether for casual listening or a lively gathering, these compact systems stand out as reliable companions that prioritize sound quality and user experience.
Top Page Image Contents