THE INFORMATION MODE
The console features an information mode that keeps track of treadmill usage information. The information mode also allows you to select a unit of measurement for the console and to turn on and turn off the demo mode.
To select the information mode, hold down the Stop button, insert the key into the console, and then release the Stop button. When the information mode is se- lected, the following information will be shown:
The left display will show the total number of miles that the walking belt has moved and the total number of hours that the treadmill has been used.
The right display will show An “E” (for English miles) or an “M” (for metric kilome- ters). Press the Speed in- crease button to change the unit of measurement, if desired.
IMPORTANT: If a “d” ap-
pears in the right display, the console is in the “demo” mode. This mode is intended to be used only while a
treadmill is displayed in a
store. While the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the displays will remain lit; the buttons will not function. If a “d” appears when the in- formation mode is selected, press the Speed de- crease button so the “d” disappears.
To exit the information mode, remove the key from the console.
11