Manuals / dbx Pro / Home Audio / Stereo Receiver

dbx Pro AFS224 quick start If not, the unit is in dual mono mode

Models: AFS224

1 11
Download 11 pages 32.26 Kb
Page 4
Image 4
If not, the unit is in dual mono mode.

6.To exit the setup mode, press and hold the channel 1 MODE button. Hold this

button until the filter LEDs flash all the way across.

7.Press the BYPASS buttons so that they are both lit red (bypassed).

8.Press and hold the channel 1 TYPE button to select between dual mono or stereo

mode.

Note: You can tell which mode you are in by pressing any of the buttons. If the other channel changes as well, the two channels are working in conjunction (stereo mode).

If not, the unit is in dual mono mode.

Page 3 Page 5
Page 4
Image 4
dbx Pro AFS224 quick start If not, the unit is in dual mono mode
Page 3 Page 5

FAQ

How do I exit setup mode?

To exit setup mode, press and hold the channel 1 MODE button until the filter LEDs flash all the way across.

How do I bypass channels?

Press the BYPASS buttons so that they are both lit red to bypass them.

How do I switch between dual mono and stereo mode?

Press and hold the channel 1 TYPE button to select between dual mono or stereo mode. You can tell which mode you are in by pressing any of the buttons.