Image IMTL39526 specification

2.Identify the Right Upright (10), which has a large rectan- gular hole near the upper end (see drawing 2b). Have a second person hold the Right Upright near the Wire Harness (17). Feed the end of the Wire Harness into the Right Upright and out of the rectangular hole near the upper end as shown. If necessary, use needlenose pliers to pull the Wire Harness out of the hole.

See drawing 2b. Locate the Left Upright (9). If the Latch Housing (77) is not attached to the Left Upright, remove the two Screws (76) from the Left Upright. Attach the Latch Housing as shown with the two Screws. Firmly tighten—but do not overtighten—the Screws.

3.Make sure that the Right Upright (10) is turned so it bends in the direction shown. Insert two 3” Bolts (47) with Washers (29) through the Base (82), and hand tighten the Bolts into the lower end of the Right Upright.

With the help of a second person, tip the treadmill onto its other side and repeat steps 1 through 3. Note: There is not a wire harness in the Left Upright (not shown). One extra Base Pad my be included.

4.With the help of a second person, set the treadmill flat on the floor so the Right Upright (10) and the Left Upright (not shown) are vertical.

Hold one of the Handrails (85) near the Right Upright

(10). Feed the end of the Wire Harness (17) into the bottom of the Handrail and out of the indicated hole. Using the Silver Screw (107), attach the end of the ground wire to the small hole in the side of the Handrail.

5.Have a second person hold the Console Base (87) and the Handrail (85) in the position shown. Touch the Right Upright (10) to discharge any static. Insert the Wire Harness (17) through the two Plastic Ties (108) on the Console Base. Find the 3-wire connector on the end of the Wire Harness, and insert the connector into the red socket beneath the Console Base. The connector should slide easily into the socket and snap into place. If the connector does not slide easily and snap into place, turn the connector and then insert it. If the connectors are not inserted properly, the Console may be damaged when the power is turned on.

Insert the 5-wire connector into the black socket beneath the Console Base (87) in the same way. Make sure that the connectors and wires appear as shown in the inset draw- ing. Insert the excess Wire Harness (17) down through the Handrail (85). Securely tighten the Plastic Ties (108) to prevent the Wire Harness from slipping. Then, cut off the ends of the Plastic Ties.

2a	10

2b			10
9		17	10
77
76	Large	Rectangular
	Hole		Hole
3	82		47
		10	29
Bend
4	107
Ground	107
Ground			17
Wire			17
Wire

Hole

		85
	10
5	87
	87	108
		108
	85
		17
		5-wire
10		3-wire
		17

IMTL39526 specifications

Image IMTL39526 is a cutting-edge visual representation that exemplifies the intersection of technology and artistry. This image captures a stunning scene that integrates advanced imaging techniques with a high level of detail and vibrancy, showcasing the capabilities of modern imaging technologies.

One of the main features of IMTL39526 is its superb resolution. The image leverages high-definition capabilities that allow it to display intricate details, making it suitable for a range of applications, from digital art to advertising and professional presentations. The clarity and sharpness of the image ensure that viewers can appreciate each aspect, from color gradients to texture nuances, resulting in an immersive visual experience.

The technology behind IMTL39526 includes the use of advanced imaging sensors that enhance color accuracy and tonal range. These sensors are designed for optimal performance in various lighting conditions, which allows the image to maintain its quality even in challenging environments. This adaptability makes it an ideal choice for showcasing subjects in diverse settings.

Another significant characteristic of IMTL39526 is its use of post-processing techniques that elevate the final output. Through careful manipulation of contrast, saturation, and brightness, the image achieves a professional finish that enhances its appeal. The application of sophisticated software tools during this phase ensures that every element of the composition is harmoniously blended, resulting in a captivating visual.

In addition to its technical attributes, IMTL39526 embodies artistic expression through its composition. The arrangement of elements within the image draws the viewer's eye and guides their attention to focal points, creating a narrative that resonates on an emotional level. This blend of technology and creativity is what makes IMTL39526 stand out among the vast array of digital images available today.

Overall, IMTL39526 is not just a mere representation; it encapsulates the advancements in imaging technology and artistic vision. Whether used for personal enjoyment, commercial use, or artistic exploration, this image serves as a testament to what can be achieved when technology and creativity converge.