Image IMTL39606.2 user manual Information MODE/DEMO Mode

Page 17

THE INFORMATION MODE/DEMO MODE

The console features an information mode that keeps track of treadmill usage information and allows you to select a unit of measurement for the console.

To select the information mode, insert the key into the console while holding down the Stop button, and then release the Stop button. When the information mode is selected, the following information will be shown:

An “E” (for English) or an “M”

(for metric) will appear in the lower right corner of the dis- play. Press the Speed in-

crease button to change the unit of measurement, if de-

sired. IMPORTANT: If a “d” appears in the display, the console is in the “demo” mode. This mode is intended to be used only when a treadmill is displayed in a store. When the console is in the demo mode, the power cord can be plugged in, the key can be removed from the console, and the display will remain lit, although the

buttons will not operate. If a “d” appears when the in- formation mode is selected, press the Speed de- crease button so the “d” disappears.

The upper left corner of the display will show the total number of thousands of steps taken by all users of the treadmill. For example, the number 396 would indi- cate 396,000 steps taken.

The lower left corner of the display will show the total number of hours that the treadmill has been used and

the total number of miles (or kilometers) that the walking

belt has moved, for a few seconds at a time.

To exit the information mode, remove the key from the console.

17

Image 17
Contents Model No. IMTL39606.2 Serial No QUESTIONS?Call TOLL-FREE Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Page Back Right Side Before YOU BeginTighten the Upright Bolts yet AssemblyLatch Holes Large Tie Colored Tie 33, and a Nut 47 do not tighten the Frame Bolt yet Outer side of the Frame Spacer facingFrame Bolt yet Careful not to pinch the wires. Next, thread two Star Washers 19. Be careful not to pinch Upright WireFront View Tighten the Console Bolts yetSide View View from Above Do not overtighten the Frame BoltsPRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Features of the Console Console DiagramHOW to Turn on the Power Step ProgramHOW to USE the Manual Mode Measure your heart rate if desired Always walk at a speed that is comfortable for youTurn on the fan if desired Whenkey. you are finished exercising, removeSelect a step program HOW to USE a Step ProgramWhen the program is completed, remove Key from the console Press the Start button to start the program HOW to USE a Calorie Goal ProgramInformation MODE/DEMO Mode HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Top TroubleshootingProblem The power turns off during use Problem The walking belt slows when walked on Exercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Key No. Qty Description Part LIST-Model No. IMTL39606.2Exploded DRAWING-Model No. IMTL39606.2 Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT HOW to Order Replacement PartsLimited Warranty