Image IMTL39105.2 HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill for Storage

Page 16

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the

lowest position. If this is not done, the treadmill may be per- manently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

1.Hold the treadmill with your hands in the locations shown by the arrow at the right. Raise the frame about halfway to the vertical position. To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the frame, make sure to lift with your legs rather than your back.

2.Move your right hand to the position shown and hold the treadmill firmly. Using your left thumb, press the storage latch to the left. Raise the frame until the storage latch closes over the catch. Make sure that the storage latch is fully en- gaged over the catch.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of direct sun- light. Do not leave the treadmill in the storage position in temperatures above 85° Fahrenheit.

1

2

Engaged

Storage

Latch

Catch

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the storage latch is fully engaged over the catch.

1.Hold the upper ends of the handrails, and place one foot against one of the wheels.

2.Tilt the treadmill back until it rolls freely on the wheels. Carefully move the treadmill to the desired location. To re- duce the risk of injury, use extreme caution while mov- ing the treadmill. Do not move the treadmill over an un- even surface.

3.Place one foot against one of the wheels, and carefully lower the treadmill until it is resting in the storage position.

HOW TO LOWER THE TREADMILL FOR USE

Front Wheels

1.See drawing 2 above. Hold the upper end of the treadmill with your right hand. Press the storage latch to the left. Pivot the frame down until it and the foot rail are past the storage latch.

2.See drawing 1. Hold the treadmill firmly with both hands, and lower the frame to the floor. Do not drop the frame. To decrease the possibility of injury, bend your legs and keep your back straight.

16

Image 16
Contents QUESTIONS? Model No. IMTL39105.2 Serial NoCall TOLL-FREE Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Page Right Side Before YOU BeginBack Make sure that the power cord is unplugged AssemblyYour own Phillips screwdriver Needlenose pliers Page Page Top View HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsolePreset Programs HOW to Turn on the PowerHOW to USE the Manual Mode Select the manual modeInsert the key into the console Start the walking belt HOW to USE the Mytracks Stepcounter Program When the program is completed, remove Key from the console HOW to USE a Preset ProgramSelect a preset program Follow your progress with the displaysInformation Mode HOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USEProblem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked on Problem The treadmill does not count your steps accuratelyConditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyKey Qty Description Key No. Qty. DescriptionR0706A Limited Warranty HOW to Order Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT