Image 831.297572 user manual Problem The heart rate monitor does not function properly

Page 19

b. If the walking belt has shifted to the right, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn the left rear roller adjustment bolt counterclockwise, and the right bolt clockwise, 1/4 of a turn each. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is centered.

c. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts clockwise, 1/4 of a turn. When the walking belt is cor- rectly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key and carefully walk on the treadmill for a few minutes. Repeat until the walk- ing belt is properly tightened.

b

c

PROBLEM: The heart rate monitor does not function properly

a. If the heart rate monitor does not function properly, refer to HEART RATE MONITOR TROUBLE- SHOOTING on page 6.

b. The CR 2032 battery may need to be replaced.

If the heart rate monitor still does not function properly, the battery should be changed. To replace the battery, locate the battery cover on the back of the sensor unit. Insert a coin into the slot in the cover and turn the cover counterclockwise to the ÒopenÓ position. Remove the cover.

Remove the old battery from the sensor unit. Insert a new CR 2032

 

 

 

 

battery, making sure that the writing is on top. In addition, make sure

 

 

 

 

that the rubber gasket is in place in the sensor unit. Replace the bat-

 

 

 

 

tery cover and turn it to the closed position.

 

 

 

 

 

Battery

 

 

 

 

 

 

Rubber

 

 

Gasket

 

 

 

 

 

 

 

 

 

 

 

PROBLEM: An error code (E1, E20, E21, E22, E23, OR E24) appears on the console

a. If an error code appears, remove the key from the console, wait for a moment, and then reinsert it. If the error code appears again, call our Customer Service Department. Do not use the tread- mill until the problem is corrected.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Model No Serial No Important Precautions Table of ContentsPage Right Side Before YOU BeginBack Assembly Heart Rate Monitor TROUBLE-SHOOTING HOW to USE the Heart Rate MonitorHOW to PUT on the Heart Rate Monitor Heart Rate Monitor Care and MaintenanceHOW to Plug in the Power Cord Operation and AdjustmentPerformant Lubetm Walking Belt Features of the Console Diagram of the ConsoleHOW to Turn on the Power HOW to USE the Manual Mode Walking belt and remove the key INCLINE/TIMESPEED/PACE DISTANCE/LAP disSelect one of the incline or speed programs HOW to USE the Incline Programs and the Speed ProgramsRemove the key from the console HOW to USE the Pulse Driven ProgramsEnter your weight and age Follow your progress with the LED displaysPut on the heart rate monitor HOW to Create a Custom ProgramSelect one of the custom programs HOW to USE a Custom Program HOW to Adjust the Cushion Level of the Treadmill HOW to Select the Information ModeHOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Move the TreadmillProblem The walking belt is off-center when walked on Maintenance and TROUBLE-SHOOTINGProblem The power turns off during use Problem The walking belt slows when walked onCR 2032 battery may need to be replaced Problem The heart rate monitor does not function properlyExercise Intensity Conditioning GuidelinesWorkout Guidelines Suggested Stretches Qty Description Part LISTÑModel No14Ó White Wire, Male/Female Exploded DRAWINGÑModel No Page Model No Full ONE Year WarrantySEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL
Top Page Image Contents