Life Fitness Sport and Essential Consumer Treadmills manual Bushing Replacement

BUSHING REPLACEMENT - CONTINUED

10.Remove the bolts and L-Brackets from the bottom of the uprights, then lower the uprights against the deck and disconnect the Console Wiring Harness Connector on the left side, and then set the uprights aside.

11.Using two pieces of wood blocks 4”x4”x30”, turn the unit upside down against the wooden blocks as shown.

Note: Make sure that treadmill is stable on the supports.

L-Brackets

Wiring Harness Connector

Unit Inverted on Supports

Supports

12.Remove the two screws securing the grounding strap.

Ground Strap

2

ASSY INSTRUCTIONS, KIT, FT BUSHING 77650901