NordicTrack NTL17940 user manual Assembly

Page 6

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench

and your own phillips screwdriver , wire cutters , and rubber mallet .

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

For help identifying the assembly hardware, see the PART IDENTIFICATION CHART on page 31.

1.With the help of a second person, carefully raise the Uprights (69) to the position shown.

See the inset drawing. Insert one of the Extension Legs (102) into the treadmill as shown. Make sure that the Extension Leg is turned so the Base Pad (99) is under- neath it. Note: It may be helpful to tip the Uprights (69) forward and tap on the Extension Leg with a rubber mal- let as you insert the Extension Leg.

Insert the other Extension Leg (not shown) in the same way.

2.Press the Lock Knob Sleeve (70) into the left Upright (69).

Remove the Lock Knob (68) from the Lock Pin (74). Make sure that the Lock Pin Collar (72) and the Spring (71) are on the Lock Pin.

Insert the Lock Pin (74) into the Lock Knob Sleeve (70) and the left Upright (69). Tighten the Lock Knob (68) back onto the Lock Pin.

3.Fold the treadmill into the storage position (see HOW TO FOLD THE TREADMILL FOR STORAGE on page 26). Orient the Left Rear Foot (140) and the Right Rear Foot (141) as shown. Attach the Left and Right Rear Feet to the Frame (110) with four 1” Tek Screws (148). Be care- ful not to overtighten the Screws.

Lower the treadmill Frame (110) (see HOW TO LOWER THE TREADMILL FOR USE on page 26).

1

 

 

69

 

69

 

102

 

99

2

 

 

68

 

71

 

72

 

74

 

70

 

69

3

 

 

140

 

141

148

110

 

148

6

Image 6
Contents QUESTIONS? Model No. NTL17940 Serial NoCustomer HOT Line Table of Contents Important Precautions Page Before YOU Begin Left SideRight Side Assembly Extension Legs 102 remain in the Uprights On the Uprights. Be careful not to pinch the wiresBe careful not to damage the Upright Wire Harness Not tighten the Bolts yetOperation and Adjustment HOW to Plug in the Power CordPerformant Lubetm Walking Belt Features of the Console Getting Started Start the walking belt HOW to USE the Manual ModeSelect the manual mode Change the incline of the treadmill as desiredMeasure your heart rate if desired Distance/Laps-TheCalories/Pulse-When On the foot railsHOW to USE Preset Programs Select the desired preset programFollow your progress with the displays Whenkey. you are finished exercising, removeSelect one of the custom programs HOW to Create Custom ProgramsDefined, one to three columns of indicators To USE Custom Programs onHOW to USE Custom Programs HOW to USE Heart Rate Programs Follow your progress with the displays HOW to Connect Your Portable CD Player HOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR Audio Adapter CablePressVCR. the Play button on your CD player or Measure your heart rate if desired HOW to USE Programs Directly from OUR WEB Site Follow the on-line instructions to start ProgramReturn to the treadmill and stand on the foot HOW to Adjust the Cushioning System Information MODE/DEMO ModeHOW to USE the Aromatherapy System Optional Chest Pulse SensorPLS2 HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USETroubleshooting Problem The power turns off during useTop Problem The walking belt slows when walked on Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencyR1203A Key Qty DescriptionOrdering Replacement Parts Part Identification ChartNTL17940 Exploded DRAWING-Model No. NTL17940 Limited Warranty