S E M B Ly, Unpacking, Tools Included

INTRODUCTION IMPORTANT PRECAUTIONS

ASSEMBLY

BEFORE YOU BEGIN

A S S E M B LY

IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!

WARNING

During the assembly process of the treadmill there are several areas that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the treadmill could have frame parts that are not tightened and will seem loose and may cause irritating noises. There should be no side-to-side play in the console masts or any forward and back play in the console assembly or handlebars. If there is any play in these areas, the treadmill has not been properly assembled. To prevent damage to the treadmill, the assembly instructions must be reviewed and corrective actions should be taken.

UNPACKING

Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering on your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side. Once the banding straps have been removed, do not lift or transport this unit unless it is fully assembled and in the upright folded position, with the lock latch secure. Unpack the unit where it will be used. The enclosed treadmill is equipped with high-pressure shocks and may spring open if mishandled. Never grab

READING RACK

MP3-IN JACK

iPod Pocket

GRIP PULSE HANDRAILS

HEADPHONE JACK

SUPPORT BAR

HANDLEBARS

ON/OFF SWITCH

CIRCUIT BREAKER

POWER CORD

TRANSPORT WHEEL

ADJUSTABLE DECK CUSHIONING

SPEAKERS

STORAGE AREA

CONSOLE MAST COVER

CONSOLE

FAN

SAFETY KEY PLACEMENT

CONSOLE MAST

MOTOR COVER

RUNNING BELT / RUNNING DECK

SIDE RAIL

ROLLER END CAP

REAR ROLLER

ADJUSTMENT BOLTS

IMPORTANT PRECAUTIONS INTRODUCTION

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

CONDITIONING GUIDELINES

hold of any portion of the incline frame and attempt to lift or move the treadmill. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN INJURY!

Before proceeding, find your treadmill’s serial number and model name located under the deck on the frame crossbar and enter it in the space provided below.

TOOLS INCLUDED

Screwdriver 4mm L-wrench 5mm T-wrench 6mm T-wrench 10 mm L-wrench

PARTS INCLUDED

TREADMILL OPERATION

CONDITIONING GUIDELINES

TROUBLESHOOTING & MAINTENANCE

enter your serial number and model name in the boxes below:

SERIAL NUMBER:

MODEL NAME:

1 Console Assembly (located under treadmill deck)

2 Console Masts

2 Console Mast Covers

2Handlebars

1Support Bar

6Hardware Bags

4iPod ® Dock Inserts

1 iPod ® Docking Station Rubber Plug

1 Bottle of Silicone Lubricant

1 Audio Adaptor Cable

1 Safety Key

1 Power Cord

TROUBLESHOOTING & MAINTENANCE

LIMITED

WARRANTY

*Refer to the serial number and model name when calling for service.

*Also enter this serial number on your Warranty Card.

If you have questions or if there are any missing parts, contact Customer Tech Support.

Contact information is located on the back panel of this manual.

For a complete exploded diagram, visit us at www.horizonﬁtness.com

LIMITED WARRANTY

CT7.0_Rev.1.3.indd 6-7

6/20/08 9:56:41 AM