Reebok Fitness RBTL13305.2 manual Assembly

Page 7

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480. Assembly requires two persons. Place the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until the treadmill is assembled.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt, the sides of the walking platform, or the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt or on the sides of the walking platform, wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires a phillips screwdriver

and the included allen wrench

damaging plastic parts, do not use power tools for assembly.

. To avoid

1.With the help of a second person, carefully raise the Uprights (65) to a vertical position.

Have the second person hold the console assembly near the Uprights (65) as shown. Look under the console as- sembly and locate the Console Wire Harness (71) and the TV cable.

Cut the plastic ties securing the Upright Wire Harness (85) and Upright TV Cable (100) to the Upright (65). Connect the Upright TV Cable to the TV cable in the con- sole assembly. Connect the Upright Wire Harness to the Console Wire Harness (71). Make sure to connect the connectors properly (see the inset drawing). The con- nectors should slide together easily and snap into place. If the connectors do not slide together easily and snap into place, turn one connector and try again. IF THE

CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON.

2.Insert the excess Wire Harnesses (71, 85) and TV cable into the Upright (65).

Set the console assembly on the Uprights (65). While a second person holds the console assembly, attach the console assembly with four 1” Console Bolts (133) and four Console Washers (69) as shown. Firmly tighten the Console Bolts.

1

Console Assembly

 

 

 

71

85

TV Cable

 

65

100

 

71

65

 

 

 

85

 

2

Console

 

 

Assembly

 

71, 85

6969

133 133

65

65

 

13369

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Mon.-Fri., 6 a.m.-6 p.m. MST QUESTIONS?Model No. RBTL13305.2 Serial No Call TOLL-FREETable of Contents Important Precautions Page Power Lines Service Right Side Before YOU BeginAssembly Page HOW to Connect AN External Source Using a Catv Cable HOW to Connect a 75 OHM Catv CableTreadmill Operation HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console HOW to USE the Manual Mode HOW to Turn on the PowerTurn on the fan if desired Measure your heart rate if desiredSelect a preset program HOW to USE a Preset ProgramFollow your progress with the displays Select a custom program HOW to Create a Custom ProgramHOW to USE a Custom Program Select a heart rate program HOW to USE a Heart Rate ProgramEnter your age Hold the handgrip pulse sensor HOW to USE the Information Mode HOW to Operate the Personal TelevisionPress the Power button to turn on Television Press the Volume buttons to adjust the volumePress the Power button again and select a Cable connection Press the Power button again and add or Delete channelsHOW to Adjust the Cushioning System HOW to Lower the Treadmill for USE HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Move the TreadmillProblem The power turns off during use TroubleshootingProblem The walking belt slows when walked on Top View Problem Television reception is poor Problem The displays of the console do not function properlyExercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesQty Description R1107AOrdering Replacement Parts No. RBTL13305.2 Exploded Limited Warranty
Top Page Image Contents