Reebok Fitness RBTL16921 manual Problem The displays of the console do not function properly

Page 26

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the allen wrench to turn the left rear roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Plug in the power cord, insert the key and run the treadmill for a few minutes. Repeat until the walking belt is cen- tered.

b. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller bolts clockwise 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key, and walk on the treadmill for a few minutes. Repeat until the walk- ing belt is properly tightened.

PROBLEM: The displays of the console do not function properly

SOLUTION: a. Remove the key from the console and UNPLUG THE POWER CORD. Next, remove the screws from the hood and carefully remove the hood. Locate the Reed Switch

(17)and the Magnet (12) on the left side of the Pulley (11). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8”. If necessary, loosen the indicated Screw (44) and move the Reed Switch slightly. Retighten the Screw. Re-attach the hood and run the tread- mill for a few minutes to check for a correct speed reading.

a

b

 

a

 

1/8”

 

44

11

 

17

12

Top

 

View

 

PROBLEM: The heart rate monitor does not function properly

SOLUTION: a. If the chest pulse sensor does not function properly, refer to CHEST

PULSE SENSOR TROUBLESHOOTING on page 8.

b. If the chest pulse sensor still does not function properly, the battery should be changed. To replace the battery, locate the battery cover on the back of the sensor unit. Insert a coin into the slot in the cover and turn the cover counterclockwise to the “open” position. Remove the cover.

Next, remove the old battery from the sensor unit. Insert a new CR 2032 battery, making sure that the writing is on top. In addition, make sure that the rubber gasket is in place in the sensor unit. Replace the battery cover and turn it to the closed position.

b

CR2032

Battery

Rubber

Gasket

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Customer HOT Line QUESTIONS?Model No. RBTL16921 Serial No Table of Contents Important Precautions Page Right Side Before YOU BeginBack Assembly Make sure that all parts are properly tightened before Part Identification ChartUprights 65 as shown, with the Bumpers 98 under You use the treadmill. Place a mat beneath the treadChest Pulse Sensor Care and Maintenance HOW to USE the Chest Pulse SensorHOW to PUT on the Chest Pulse Sensor Chest Pulse Sensor TroubleshootingPerformant Lubetm Walking Belt HOW to Plug in the Power CordTreadmill Operation Features of the Console HOW to Turn on the Power HOW to USE the Manual ModeRemoved, the console is in the demo mode When you are finished exercising, removeAdjust the incline of the treadmill to the lowest See page 23 and turn off the demo modeHOW to USE Preset Workout Programs Select one of the preset workout programsPut on the chest pulse sensor HOW to USE Heart Rate ProgramsFollow your progress with the displays Select a heart rate programEnter your age and a maximum speed setting Select one of the custom programs HOW to Create Custom ProgramsWhen the program has ended, remove the key HOW to USE Custom Programs HOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerPress the Play button on your CD player or HOW to Connect Your VCRInsert the key into the console VCRMeasure your heart rate, if desired Whenkey. the program is completed, removeReturn to the treadmill and stand on the foot HOW to USE Programs Directly from OUR WEB SiteFollow the on-line instructions to start Program Follow your progress with the LED track Displays Information MODE/DEMO Mode HOW to Adjust the Firmness of the Cushioning SystemHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USEProblem The walking belt slows when walked on TroubleshootingProblem The power turns off during use Problem The displays of the console do not function properly Walking and Cardiorespiratory Endurance Walking and Weight ReductionReebok University Walking and Reduced Risk for CARDIOVAS- Cular DiseaseReferences Walking and Stress ReductionWalking and Injuries Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencyR0703A Qty DescriptionHOW to Order Replacement Parts Description QtyExploded DRAWING-Model No.RBTL16921 Model No. RBTL16921 Limited Warranty
Top Page Image Contents