Landice Finest Treadmills manual Do not over-tighten

Page 8

Assembly Instructions

*OPTIONAL Contact Heart Rate Assembly

Skip to Step 11 if treadmill has standard crossbar

STEP 9:

 

STEP 10:

Connect contact bar

 

Ground contact bar

 

 

 

 

 

 

 

 

 

STEP 11:

 

STEP 12:

Snap upright cover

 

Install upright end cap

 

 

 

Feed the contact heart rate harness through the access hole in the inside of the left upright (insert strain relief provided). Feed harness up into the control panel.

Pull back the membrane and connect harness to white 3-pin connector on side of display board.

Unscrew the unused screw on the top of the upright where the contact harness enters the control panel.

Feed the screw through the green grounding wire eyelet and rescrew it back into place.

Put the membrane back into place.

Carefully align the upright cover to upright. Working from top to bottom, snap the upright cover into place.

Press the plastic end cap into the upright carefully fitting the plastic pins into the small bosses in the aluminum.

Align the upright cover beneath the end cap and install the Phillips head screw.

Tighten the Phillips head screw until side cover aligns with endcap

(Do not over-tighten).

STEP 13:

 

STEP 14:

 

STEP 15

 

STEP 16:

Check drive belt tension

 

Route the wire harness

 

Adjust the treadbelt

 

Install motor cover

 

 

 

 

 

 

 

harness

Check the tension on the drive belt by placing the drive belt between your thumb and forefinger and twisting.

The proper twist is 45˚. If the belt needs to be adjusted use a 7/16” socket and turn the bolt underneath the motor pan attached to the motor’s hook screw.

HOME TREADMILL:

Route the wire harness underneath the elevation motor and secure with harness restraint clip provided. Plug connector into circuit board until it snaps into place.

COMMERCIAL TREADMILL:

Route the wire harness behind the elevation motor and secure with harness restraint clip provided. Plug connector into circuit board until it snaps into place.

The treadbelt is tracked and tensioned via the take-up screws located at the back of the treadmill.

Check the tension of the treadbelt. At proper tension you should be able to place your hand between the belt and deck and reach the center of the treadmill. If you cannot reach the center, the belt is too tight and must be loosened. If your hand reaches past the center the belt is too loose and must be tightened.

Remove the black motor cover screws in the side of the frame. Place motor cover onto treadmill.

Attach motor cover with Phillips head screws provided. Place rubber spacer between cover and frame.

Plug treadmill into a dedicated 15A outlet. Walk on treadmill at approximately 2.5 mph for 20 to 45 minutes to properly walk in lubricant.

3

Image 8
Contents Sport Trainer Before you start the treadmill Important Safety Instructions Volt Treadmills 200 250 Volt TreadmillsTable of Contents Selecting a Location Warranty InformationIntroduction Assembly Instructions StepDo not over-tighten Getting Started Manual Mode Display optionsHeart Rate Monitoring Optional What is exercise intensity?What is maximum heart rate? Why should I monitor exercise intensity? What is a heart monitor?Different Intensity Levels Within a Target Heart Rate Zone How do I determine my Target Heart Rate Zone?Heart Rate Monitors Optional AccuTrack Contact Heart Rate Monitor Optional Getting the Most Out of Your Workouts Should you walk or run?Frequency of Exercise During Your WorkoutAfter Your Workout Keeping Track of ProgressMotor Brushes Treadmill MaintenanceTreadmill Lubrication & Cleaning Appendix a Medrail Installation Crafting the World’s Finest Treadmills

Finest Treadmills specifications

Landice Finest Treadmills have earned a reputation for delivering top-tier performance and durability, catering to serious fitness enthusiasts and casual users alike. Known for their robust construction and innovative technology, these treadmills embody quality and efficiency.

One of the standout features of Landice treadmills is their commercial-grade construction. Built with a heavy-duty steel frame, they are designed to withstand intense workouts and heavy usage, making them ideal for home gyms as well as commercial environments. The treadmills boast a weight capacity of up to 400 pounds, ensuring stability and safety regardless of the user’s size.

Landice treadmills come equipped with a powerful motor that offers smooth operation at varying speeds. The high-performance motors range from 3.0 to 4.0 horsepower, allowing users to achieve their desired intensity seamlessly. Additionally, the incline feature on many models enables users to adjust their workout intensity, simulating outdoor running conditions while building strength and endurance.

Another key characteristic of Landice treadmills is their advanced cushioning system, which is designed to reduce the impact on joints. The trademarked LCS cushioning technology absorbs shock, providing a comfortable running surface that minimizes the risk of injury. This feature is especially beneficial for those who may have prior joint issues or for users engaging in long-distance training.

Landice treadmills also offer an array of user-friendly technologies. Most models come with a large, backlit LCD display that provides real-time workout statistics, including speed, distance, time, calories burned, and heart rate monitoring. Some models feature integrated heart rate sensors or the option to connect to wireless heart rate monitors, allowing users to maintain their desired training zones effectively.

Moreover, Landice incorporates a variety of preset workout programs, designed by fitness experts to cater to different fitness levels and goals, such as weight loss, endurance training, and interval training. Users can also create custom workouts, ensuring a personalized and engaging fitness experience.

In addition to performance features, Landice treadmills are designed with longevity in mind. Maintenance-free components, such as a self-lubricating deck and high-quality belt, require minimal upkeep, making them a wise investment for long-term use.

Overall, Landice Finest Treadmills are a fusion of technology, durability, and user-centric design, offering an unparalleled workout experience whether at home or in a professional setting. With their commitment to quality, Landice continues to be a benchmark in the treadmill market, appealing to fitness enthusiasts across the spectrum.