A S S E M B LY STEP 1 |
|
|
MAIN FRAME |
|
|
BOLTS (A) |
|
|
CRANK | REAR STABILIZER | SEAT SLIDE TUBE |
AXIS | ||
FRONT FOOT TUBE |
|
|
| WASHERS (C) |
|
PEDAL (FACING FORWARD) | SPRING WASHERS (B) |
|
| BOLTS (D) |
|
A)Open HARDWARE BAG FOR STEP 1.
B)Attach the FRONT FOOT TUBE to the MAIN FRAME using 2 BOLTS (A).
C)Attach REAR STABILIZER to the SEAT SLIDE TUBE using 2 WASHERS (C), 2 SPRING WASHERS (B) and 2 BOLTS (D).
D)Insert caps into the tube ends.
E)Attach the RIGHT PEDAL onto the RIGHT CRANK AXIS and then tighten with the included
13mm/15mm FLAT WRENCH. F) Repeat on other side.
HARDWARE BAG FOR STEP 1 CONTENTS :
BOLT (A) | SPRING WASHER (B) | WASHER (C) | BOLT (D) |
Qty: 2 | Qty: 2 | Qty: 2 | Qty: 2 |
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
BIKE OPERATION
TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES
LIMITED WARRANTY