Spirit XT475, XT375 owner manual Assembly XT675

Page 16

!!ATTENTION: IMPORTANT UNPACKING INSTRUCTIONS. PLEASE READ BEFORE UNPACKING YOUR FOLDING TREADMILL!!

Serious injury could occur if this folding treadmill is not unpacked properly.

There is a Velcro strap installed around the treadmill base that prevents the treadmill from unfolding accidentally during shipping. If this strap is not removed properly the treadmill could spring open unexpectedly and cause injury if someone is standing near the treadmill when the strap is removed.

To ensure your personal safety during removal of the shipping strap please make sure the treadmill is positioned flat on the ground, in the orientation it would be in if you were using the treadmill. Do not turn the treadmill up on it￿s side while removing the shipping strap. This could cause the treadmill￿s folding mechanism to spring open. If the end of the Velcro strap (that you need to grab to remove it) happens to be under the treadmill deck, reach under the deck to grab it, but do not tilt the treadmill up to gain access to the strap end.

Assembly (XT675)

Unpack the XT800 and locate the hardware pack. The hardware pack is separated into: one section containing tools and four sections labeled steps 1- 4 which contain the hardware needed for assembly of each step. The assembly steps below are numbered one through four and correspond to the hardware in the numbered sections of the hardware pack. Remove only the hardware for the step you are currently assembling to avoid confusion and mix-ups.

STEP 1

1Take the Right upright tube and connect the Middle Console Cable that exits from the bottom of the tube, with the lower Console Cable. Install the Left and Right (L & R) Uprights into the Left and Right Receiving Tubes. Be careful not to pinch the wire when installing the upright.

2.Install and hand tighten the two 3/8￿ x 2￿ Button Head Socket bolts, two 3/8￿ split washers and two10 m/m Beveled Washers into the top holes on the front sides of the L & R tubes. Then install and hand tighten the 6pcs of 5/16￿x 15mm Button Head Socket Screw in the remaining holes on the sides and front of the L & R tubes. Do not tighten these screws until assembly is complete. This makes aligning the holes for mounting the console easier.

15

XT375 / XT475 / XT675

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Page Table of Contents Product Registration Important Safety Instructions Important Electrical Information Grounding InstructionsSafety Tether Cord To UseAssembly Instructions XT375 / XT475 Assembly Pack Check List XT375 / XT475 Tools Assembly XT375 /XT475 Step Assembly Instructions XT675 Assembly Pack Check List XT675 16m/m Tools Assembly XT675 Step XT375 / XT475 Folding Instructions TransportOperation of Your Treadmill Getting started Pause/Stop/Reset FeatureQuick-Start Operation Incline Feature Pulse Grip FeatureDot Matrix Center Display Manual Operation Mile TrackProgrammable Features User Programs Target Heart Rate Rate of Perceived ExertionXT375 / XT475 / XT675 Erratic Operation Using a Heart Rate TransmitterSpecial Operations of Heart Rate Functions How the Heart Rate Control Program Works Heart Rate ControlSelecting a Heart Rate Control Program General Maintenance Belt AdjustmentsTreadbelt Tracking Adjustment Belt / Deck Lubrication Service Checklist Diagnosis Guide Problem SOLUTION/CAUSECalibration procedure Manufacturer’s Limited Warranty Treadmill Warranty

XT675, XT475, XT375 specifications

The Spirit XT375, XT475, and XT675 are part of Spirit Fitness’s impressive lineup of high-quality treadmills, designed with advanced technology and user-oriented features to enhance workout experiences. Each model caters to varying fitness levels and user preferences while maintaining robust build quality and performance.

The Spirit XT375 is an ideal choice for those seeking a solid treadmill for home use. Its 2.75 HP motor delivers a smooth and reliable performance, allowing users to reach speeds of up to 12 mph. The 20 x 55-inch running surface provides ample space, while the cushioned deck technology minimizes impact on joints, making workouts more comfortable. The XT375 includes an easy-to-read LED console that displays essential workout metrics including time, speed, distance, calories burned, and incline level. Additionally, it features multiple built-in workout programs to keep users motivated and to offer variety in their training routines.

Stepping up to the XT475, users benefit from enhanced features, including a more powerful 3.0 HP motor, which supports faster speeds and longer-lasting performance. The running surface increases in size to 20 x 60 inches, accommodating taller runners without compromising safety or comfort. The XT475 includes an advanced graphic display that provides more detailed workout data and features Bluetooth compatibility, allowing users to sync data with fitness apps for easier tracking of progress. The console’s integrated speakers and USB charging port provide added convenience for users who like to listen to music or charge their devices while exercising.

The XT675 is the premium model, designed for serious fitness enthusiasts. It boasts a powerful 3.5 HP motor and a spacious 22 x 60-inch running surface, ideal for both walking and running. This model features a comprehensive console with a vibrant, backlit LCD screen that offers real-time workout feedback. The XT675 also includes more advanced workout programs, ensuring users can continuously challenge themselves. The Spirit XT675 incorporates an innovative heart rate monitoring system, allowing users to optimize their cardio workouts by adjusting intensity based on real-time heart rate data.

All three models are equipped with durable frames, ensuring long-term reliability, while their folding designs provide convenient storage options. With innovative features across the XT375, XT475, and XT675, Spirit Fitness has created a range of treadmills that cater to diverse fitness requirements, making them suitable for everyone from casual walkers to dedicated runners.
Top Page Image Contents