Spirit XT2751, XT175 owner manual General Maintenance, Belt Adjustments

Page 24

General Maintenance

Belt and Bed - Your treadmill uses a very high-efficient low-friction bed. Performance is maximized when the bed is kept as clean as possible. Use a soft, damp cloth or paper towel to wipe the edge of the belt and the area between the belt edge and frame. Also reach as far as practical directly under the belt edge. This should be done once a month to extend belt and bed life; use water only - no cleaners or abrasives. A mild soap and water solution along with a nylon scrub brush will clean the top of the textured belt. Allow the belt to dry before using. Belt Dust - This occurs during normal break-in or until the belt stabilizes. Wiping excess off with a damp cloth will minimize buildup.

General Cleaning - Dirt, dust, and pet hair can block air inlets and accumulate on the running belt. On a monthly basis: vacuum underneath your treadmill to prevent buildup. Once a year, you should remove the motor hood and vacuum out dirt that may accumulate. UNPLUG POWER CORD BEFORE THIS TASK.

BELT ADJUSTMENTS:

Treadmill belt Tension Adjustment - Belt tension is not critical for most users. It is very important for joggers and runners in order to provide a smooth, steady running surface. Adjustment must be made from the right side of the rear roller in order to adjust tension with the 6 mm Allen wrench provided in the parts package. The adjustment bolt is located at the end of the right side rail as noted in diagram below.

Tracking / Tension

Tracking / Tension

Adjustment

Adjustment

Note: Adjustment is through small hole in end

Tighten the rear roller only enough to prevent slippage at the front roller. Turn the treadmill belt tension adjusting bolts in increments of 1/4 turn and inspect for proper tension.

When an adjustment is made to the belt tension you must also perform a tracking adjustment to compensate for the change in belt tension. This is accomplished by turning both the tension and tracking Allen bolts an equal amount of turns. The tracking adjustment should be made by turning both bolts clockwise no more than a 1/4 turn at a time.

DO NOT OVERTIGHTEN ￿ Over tightening will cause belt damage and premature bearing failure.

23

XT175 / XT275

Image 24
Contents Page Table of Contents Product Registration Register Your PurchaseImportant Safety Instructions Important Electrical Information Grounding InstructionsSafety Tether Cord Important Operating InstructionsAssembly Pack Check List XT175 / XT275 Assembly Instructions XT175 / XT275 AssemblyAssembly Instructions XT175 / XT275 Folding Instructions TransportTo Fold The Treadmill To Unfold The TreadmillGetting familiar with the control panel XT175 Console Getting StartedQuick Start Window Displays Button FunctionsRapid Speed Keys Preset Programs P1~P5 Rapid Incline KeysPrograms User U1~U2 Speed Profile Getting started XT275 ConsolePause/Stop/Reset Feature Mile TrackPulse Grip Feature Calorie DisplayTo Turn Treadmill Off Programmable Features To Select a ProgramUser Programs XT175 / XT275 Target Heart Rate Using a Heart Rate Transmitter Erratic OperationSpecial Operations of Heart Rate Functions Heart Rate Control Operation How the Heart Rate Control Program WorksSelecting a Heart Rate Control Program General Maintenance Belt AdjustmentsTreadmill Belt Tracking Adjustment To SET Treadbelt TrackingBelt/deck lubrication procedure Service Checklist Diagnosis Guide Error MessagesManufacturer’s Limited Warranty Treadmill Warranty

XT175, XT2751 specifications

The Spirit XT275 and XT175 treadmills stand out in the fitness equipment market, offering a blend of advanced technology, user-friendly features, and robust construction. Both models are designed to cater to a wide range of fitness enthusiasts, whether you are a beginner or an experienced athlete looking to enhance your training routine.

The Spirit XT275 treadmill is equipped with a powerful 3.0 HP motor, providing smooth and consistent performance. It features an oversized running surface, measuring 20 x 60 inches, ensuring ample space for users of all sizes to run comfortably. The XT275 also includes a 10.1-inch color LCD display, which provides clear feedback on essential metrics such as speed, time, distance, calories burned, and incline level. Users can easily track their progress and stay motivated during their workouts.

Incorporating advanced technology, the XT275 offers Bluetooth connectivity, allowing users to sync their devices and access a variety of fitness apps. The built-in speakers enhance the workout experience, enabling users to listen to their favorite music or podcasts. Additionally, the XT275 features a unique folding design, making storage convenient without compromising durability.

On the other hand, the Spirit XT175 treadmill is designed for those looking for a high-quality machine without breaking the bank. It is equipped with a 2.5 HP motor, which delivers reliable performance for walking, jogging, and light running. The XT175 offers a slightly smaller running surface of 20 x 55 inches, making it a suitable option for users with limited space.

The XT175 also boasts a user-friendly console with an easy-to-read LED display, showcasing essential workout metrics. One of its appealing features is the variety of preset workout programs, which cater to different fitness goals, ensuring a focused and effective workout experience.

Both models share essential safety features, including an integrated safety key that stops the machine in case of emergency. These treadmills are built to be sturdy and durable, designed to withstand regular use. In summary, the Spirit XT275 and XT175 treadmills deliver excellent performance, advanced features, and ease of use, making them top choices for home fitness enthusiasts.