Spirit IN839 owner manual Important Electrical Information

Page 5
Grounding Instructions

fatigue.

Remove tether cord after use to prevent unauthorized treadmill operation.

SAVE THESE INSTRUCTIONS - THINK SAFETY!

Important Electrical Information

WARNING!

NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. ●Route the power cord away from any moving part of the treadmill including the elevation mechanism and transport wheels.

NEVER remove any cover without first disconnecting AC power.

● If voltage varies by ten percent (10%) or more, the performance of your treadmill may be affected. Such conditions are not covered under your warranty. If you suspect the voltage is low, contact your local power company or a licensed electrician for proper testing. See Diagnosis Guide, page 13.

NEVER expose this treadmill to rain or moisture. This product is NOT designed for ●use outdoors, near a pool or spa, or in any other high humidity environment.

This product must be grounded. If the treadmill should malfunction or breakdown, grounding provides a path of least resistance for electric current, reducing the risk of electric shock. This product is equipped with a cord having an equipment-grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

DANGER - Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug illustrated below. A temporary adapter that looks like the adapter illustrated below may be used to connect this plug to a 2-pole receptacle as shown below if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (below) can be installed by a qualified electrician. The green colored rigid ear-lug, or the like, extending from the adapter, must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.

Adapter

Grounded Outlet

4

Tab of

Grounding IN839

Metal Screw

 

Screw

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Page Table of Contents Register Your Purchase Product RegistrationImportant Safety Instructions Important Electrical Information Never remove any cover without first disconnecting AC powerImportant Operation Instructions Safety Tether CordAssembly Pack Check List IN839 Assembly Instructions IN839Assembly Instructions IN839 Transport IN839 Folding InstructionsWindow Display Operation of Your TreadmillConsole Operation Function ButtonsBelt Adjustments General MaintenanceError Message Belt / Deck Lubrication Treadbelt Tracking AdjustmentTo SET Treadbelt Tracking Problem SOLUTION/CAUSE Service Checklist Diagnosis GuideTreadmill Warranty Manufacturer’s Limited WarrantySpirit Manufacturing, Inc Box Jonesboro, AR

IN839 specifications

The Spirit IN839 is a remarkable innovation in the realm of commercial drones, designed to transform aerial services across various industries. This drone combines state-of-the-art technologies with user-centric features, making it a preferred choice for aerial photography, surveying, agriculture, and more.

One of the key features of the Spirit IN839 is its exceptional flight endurance. Equipped with high-capacity lithium polymer batteries, this drone can deliver impressive flight times of up to 45 minutes on a single charge, allowing users to complete operational tasks without frequent interruptions. The Spirit IN839 supports fast charging technology, ensuring that users can quickly get back in the air.

The drone's design incorporates advanced aerodynamics, resulting in a lightweight structure that contributes to efficient power consumption. This optimized design not only enhances flight stability but also ensures that the drone can withstand various environmental conditions. With a robust chassis and durable materials, the Spirit IN839 is built to endure those tough aerial missions.

In terms of technology, the Spirit IN839 boasts a cutting-edge navigation system that facilitates precise positioning and tracking. Utilizing GPS and GLONASS for enhanced accuracy, this drone can operate with a remarkable level of reliability. The drone’s navigation system also features obstacle avoidance technology, utilizing ultrasonic and infrared sensors to detect and navigate around potential hazards, thus significantly reducing the risk of accidents.

Camera capabilities are another standout feature of the Spirit IN839. It comes equipped with a high-resolution 4K camera, capable of capturing stunning aerial imagery and video. The camera is mounted on a three-axis gimbal stabilization system, which ensures smooth and clear footage, even in windy conditions. This makes the Spirit IN839 ideal for cinematographers and surveyors who require high-quality visual data.

Furthermore, the Spirit IN839 integrates an intelligent flight mode, allowing users to set pre-defined flight paths or conduct autonomous operations. This feature is particularly beneficial for agricultural monitoring and real estate photography, where repetitive flight patterns can be easily programmed.

In summary, the Spirit IN839 stands out in the drone market with its superior flight performance, advanced technological features, and exceptional imaging capabilities. Its user-friendly interface and autonomous functions make it an invaluable tool for industries ranging from agriculture to film production, paving the way for innovative aerial solutions.
Top Page Image Contents