Spirit IN839 owner manual Important Operation Instructions, Safety Tether Cord

Page 6

Important Operation Instructions

NEVER operate this treadmill without reading and completely understanding the

●results of any operational change you request from the computer.

Understand that changes in speed and incline do not occur immediately. Set your desired speed on the computer console and release the adjustment key. The computer will obey the command gradually.

NEVER use your treadmill during an electrical storm. Surges may occur in your

●household power supply that could damage treadmill components.

Use caution while participating in other activities while walking on your treadmill; such as watching television, reading, etc. These distractions may cause you to lose balance or stray from walking in the center of the belt; which may result in serious injury.

NEVER mount or dismount the treadmill while the belt is moving. Spirit treadmills ● start at a very low speed and it is unnecessary to straddle the belt during start up.

Simply standing on the belt during slow acceleration is proper after you have learned to operate the unit.

Always hold on to a handrail or hand bar while making control changes (incline, ● speed, etc.).

Do not use excessive pressure on console control keys. They are precision set to function properly with little finger pressure. Pushing harder is not going to make the unit go faster or slower. If you feel the buttons are not functioning properly with normal pressure, contact your Spirit dealer.

Safety Tether Cord

A safety tether cord is provided with this unit. It is a simple magnetic design that should be used at all times. It is for your safety should you fall or move too far back on the tread-belt.

Pulling this safety tether cord will stop tread-belt movement.

To Use:

1.Place the magnet into position on the round metal portion of the console control head. Your treadmill will not start and operate without this. Removing the magnet also secures the treadmill from unauthorized use.

2.Fasten the plastic clip onto your clothing securely to assure good holding power. Note: The magnet has strong enough power to minimize accidental, unexpected stopping. The clip should be attached securely to make certain it does not come off. Be familiar with its function and limitations. The treadmill will stop, depending on speed, with a one to two step coast anytime the magnet is pulled off the console. Use the red

5

IN839

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Page Table of Contents Product Registration Register Your PurchaseImportant Safety Instructions Never remove any cover without first disconnecting AC power Important Electrical InformationSafety Tether Cord Important Operation InstructionsAssembly Instructions IN839 Assembly Pack Check List IN839Assembly Instructions IN839 IN839 Folding Instructions TransportOperation of Your Treadmill Window DisplayFunction Buttons Console OperationGeneral Maintenance Error MessageBelt Adjustments Treadbelt Tracking Adjustment To SET Treadbelt TrackingBelt / Deck Lubrication Service Checklist Diagnosis Guide Problem SOLUTION/CAUSEManufacturer’s Limited Warranty Treadmill WarrantySpirit Manufacturing, Inc Box Jonesboro, AR

IN839 specifications

The Spirit IN839 is a remarkable innovation in the realm of commercial drones, designed to transform aerial services across various industries. This drone combines state-of-the-art technologies with user-centric features, making it a preferred choice for aerial photography, surveying, agriculture, and more.

One of the key features of the Spirit IN839 is its exceptional flight endurance. Equipped with high-capacity lithium polymer batteries, this drone can deliver impressive flight times of up to 45 minutes on a single charge, allowing users to complete operational tasks without frequent interruptions. The Spirit IN839 supports fast charging technology, ensuring that users can quickly get back in the air.

The drone's design incorporates advanced aerodynamics, resulting in a lightweight structure that contributes to efficient power consumption. This optimized design not only enhances flight stability but also ensures that the drone can withstand various environmental conditions. With a robust chassis and durable materials, the Spirit IN839 is built to endure those tough aerial missions.

In terms of technology, the Spirit IN839 boasts a cutting-edge navigation system that facilitates precise positioning and tracking. Utilizing GPS and GLONASS for enhanced accuracy, this drone can operate with a remarkable level of reliability. The drone’s navigation system also features obstacle avoidance technology, utilizing ultrasonic and infrared sensors to detect and navigate around potential hazards, thus significantly reducing the risk of accidents.

Camera capabilities are another standout feature of the Spirit IN839. It comes equipped with a high-resolution 4K camera, capable of capturing stunning aerial imagery and video. The camera is mounted on a three-axis gimbal stabilization system, which ensures smooth and clear footage, even in windy conditions. This makes the Spirit IN839 ideal for cinematographers and surveyors who require high-quality visual data.

Furthermore, the Spirit IN839 integrates an intelligent flight mode, allowing users to set pre-defined flight paths or conduct autonomous operations. This feature is particularly beneficial for agricultural monitoring and real estate photography, where repetitive flight patterns can be easily programmed.

In summary, the Spirit IN839 stands out in the drone market with its superior flight performance, advanced technological features, and exceptional imaging capabilities. Its user-friendly interface and autonomous functions make it an invaluable tool for industries ranging from agriculture to film production, paving the way for innovative aerial solutions.
Top Page Image Contents