FIGURE 6 |
26 |
3 |
1 |
23 |
12 |
1/2 X 5” 21 |
STEP 6:
•SECURELY assemble the ADJUSTABLE SEAT SUPPORT (3) to the UPPER BENCH FRAME (1) using one 1/2 X 5” BOLT (21), two 1/2 INT TOOTH LOCK WASHERS (23), and one 1/2” LOCK NUT (26) as shown in FIGURE 6.
•Assemble one SPRING PIN ASSEMBLY (12) to the UPPER BENCH FRAME (1) as shown in FIGURE 6. (NOTE: Tighten jam nut
SECURELY.)
FIGURE 7
11
2
24
M10 X 35mm 15
M10 X 35mm 14 
FLAT HEAD BOLT
STEP 7:
•SECURELY assemble the BACK PAD (11) the the BACK PAD SUPPORT (2) using two M10 X 35mm BOLTS (15), two M10 X 35mm FLAT HEAD BOLTS (14) and two 3/8” INT TOOTH LOCK WASHERS (24) as shown in FIGURE 7
8