Univex OHDADJ manual X 2-1/4 16 3/8 X

FIGURE 2
	7
	27	8
13	24
	3/8 X 2-1/4”	17
	16 3/8 X 2”

STEP 2:

•SECURELY assemble two 2” OD WHEELS (13) to the REAR BENCH SUPPORT (7) using two 3/8 X 2” BOLTS (16), four 3/8” INT TOOTH LOCK WASHERS (24) and two 3/8” LOCK NUTS (27) as shown in FIGURE 2. (NOTE: Do not over tighten this connection, wheels should rotate smoothly.)

•SECURELY assemble two 2” OD WHEELS (13) to the FRONT BENCH SUPPORT (8) using two 3/8 X 2-1/4” BOLTS (17), four 3/8” INT TOOTH LOCK (24) and two 3/8” LOCK NUTS (27) as shown in FIGURE 2. (NOTE: Do not over tighten this connection, wheels should rotate smoothly.)

5