BEFORE YOU BEGIN
PROBLEM: The walking belt slows when walked on
Thank you for selecting the WESLO CADENCE® 630 treadmill. The CADENCE 630 treadmill combines ad-
please call our Customer Service Department at 08457 089 009. To help us assist you, please note the prod-
SOLUTION: a. If an extension cord is needed, use only a
vanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home. And when you’re not exercising, the unique CADENCE 630 can be folded up, requiring less than half the floor space of other treadmills.
For your benefit, read this manual carefully before using the treadmill. If you have additional questions,
uct model number and serial number before calling. The model number of the treadmill is WETL21021. The serial number can be found on a decal attached to the treadmill (see the front cover of this manual for the lo- cation).
Before reading further, please review the drawing below and familiarise yourself with the labelled parts.
b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 5 to 7 cm (2 to 3 in.) off the walking platform. Be careful to keep the walking belt centred. Plug in the power cord, insert the key and run the treadmill for a few minutes.
b | |
| |
Rear Roller |
|
Adjustment Bolts |
|
Water Bottle Holder | Console |
(Bottle not included) |
|
Repeat until the walking belt is properly tightened.
c. If the walking belt still slows when walked on, please call our Customer Service Department.
Key/Clip |
|
| Handrail |
LEFT SIDE | RIGHT SIDE |
Walking Belt | Hood |
| |
Foot Pad |
|
| Front Wheel |
| Circuit Breaker |
Rear Roller | Incline Leg |
Adjustment Bolts |
|
PROBLEM: The walking belt is
SOLUTION: a. If the walking belt is
b. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of the walking belt 5 to 7 cm (2 to 3 in.) off the walking platform. Be care- ful to keep the walking belt centred. Plug in the power cord, insert the key and carefully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.
a
b |
4 |
13