Epic Fitness CT705 manual Correct Incorrect, Upright do not fully tighten the Screws Yet

3.	Identify the Right Upright (85) and the Right	3
	Upright Spacer (91), which are marked with
	“Right” stickers.	87			85
	Insert the Upright Wire (87) through the Right		Wire Tie
	Upright Spacer (91) as shown. Set the Right				87
	Upright Spacer on the Base (95). See inset
	drawings B and C. Make sure that the Right				91
	Upright Spacer sits flush against the Base. If				95
	necessary, turn the Right Upright Spacer and
	try again.	A
	Have a second person hold the Right Upright
	(85) near the Base (95). See inset drawing A.
	Tie the wire tie in the Right Upright securely		85
	around the end of the Upright Wire (87). Then,
	pull the other end of the wire tie until the Upright		Wire
	Wire is routed completely through the Right	87
	Upright.		Tie	C91
		B 91	95		95
			Correct		Incorrect
4. Hold a Screw Spacer (14) inside the lower end		4
	of the Right Upright (85). Insert a 3/8" x 4"				7
	Screw (7) with a 3/8" Star Washer (11) into the
	Right Upright and the Screw Spacer. Repeat		85
	this step with a second Screw Spacer (14),
	3/8" x 4" Screw (7), and 3/8" Star Washer				11
	(11).
	Hold the Right Upright (85) against the Right				8
					14
	Upright Spacer (91). Be careful not to pinch
	the Upright Wire (87). Tighten the 3/8" x 4"
	Screws (7) until the heads of the Screws touch				91
	the Upright; do not fully tighten the Screws
	yet.
		8