4 Connect the speaker cord to the speaker terminal of the leg
•Use the
•Each speaker cord has its name tag attached to one end. Attach the end without the name tag to the speaker terminal.
Tag
To the speaker terminal of the leg
1)Insert the speaker cord inside the stand as illustrated below.
•Pull the speaker cord out of the center of the stand by about 50 cm.
The cord with the black stripe is on this side, facing up.
Stand
2)Insert the tips of the speaker cord into the leg and pull them out as illustrated below.
Leg
3) Insert the speaker cord into the speaker terminal | English |
| |
inside the leg. |
|
1 Press and hold the clamp. |
|
2 Insert the exposed core of the speaker cord fully |
|
into the terminal. |
|
• Connect the cord with the black stripe to the · |
|
terminal. |
|
3 Release your finger. |
|
1 2 3
Leg
The cord with the black stripe.
5 Attach the terminal cover to the leg.
Push cords fully inside the leg. Then fix the terminal cover using the screw you removed in step 1.
Terminal cover
Screw
grooves claws
To be continued on the next page
– 5 –