JVC SX-XDC33, SX-XDS33 manual Specification, General layout of speakers

Page 8

Additional Information (continued)

General layout of speakers

Place all speakers at the same distance from the listening position if possible.

Usually place the center speaker close to the TV.

When you place the center speaker on a TV, make sure the surface is level and stable.

Front left

 

Front right

speaker

 

speaker

 

 

 

Subwoofer

Center

speaker

 

Listening position

Rear left

Rear right

speaker

speaker

For a subwoofer to be used with SX-XD33, it is recommended to use SX-DW303. This combination gives you the best possible high quality surround sounds.

Do not lean against the speakers, as the speakers could fall down or break, possibly causing an injury. Especially be careful that children do not lean against them.

Specification

SX-XDS33 (Satellite speaker)

Type

:

1-way 2-speaker

 

 

Bass reflex type, magnetically

 

 

shielded type

Speaker unit

:

Direct drive (9.5 cm 1 cm) 2

Frequency range

:

120 Hz to 20 000 Hz

Input impedance

:

8

Power handling Capacity :

100 W

Sound pressure level

:

82 dB/W•m

Dimensions (approx.)

:

282 mm (width) 1108 mm

 

 

(height) 282 mm (depth)

Mass (approx.)

:

3.0 kg each

SX-XDC33 (Center speaker)

Type

:

1-way 2-speaker

 

 

Bass reflex type, magnetically

 

 

shielded type

Speaker unit

:

5.5 cm cone 2

Frequency range

:

80 Hz to 20 000 Hz

Input impedance

:

8

Power handling Capacity :

100 W

Sound pressure level

:

81 dB/W•m

Dimensions (approx.)

:

200 mm (width) 78 mm

 

 

(height) 120 mm (depth)

Mass (approx.)

:

0.85 kg

– 8 –

Image 8
Contents Home Cinema DD Speaker System Precautions for installation Precautions for Daily UseTo maintain the appearance of the speakers To improve the sound fieldChecking the supplied Accessories When connecting the speaker cordsWhen using other speaker cords About the OFC cordAssembly Assembling the satellite speakers Join the leg to the standConnect the speaker cord to the speaker terminal of the leg EnglishAttach the terminal cover to the leg Insert the speaker cord into the speaker terminalFor disassembly Join the speaker section and the legConnecting the Center speaker Before connectingAdditional Information Insert the speaker cord into the speaker terminalSpecification General layout of speakersVictor Company of JAPAN, Limited