JVC SR-VS10U Edit From a Camcorder, Make Connections, Load a Cassette, Select Recording Deck

Page 56

56EN

EDITING(cont.)

Edit From A Camcorder

A

S-VIDEO IN

PAUSE connector

Recorder

Your VCR

VIDEO IN	AUDIO
	IN

S-VIDEO cable

(supplied) Audio/Video cable

S-VIDEO(supplied)

OUT

You can use a camcorder as the player and your VCR as the recorder. You can perform digital dubbing if you connect a device such as a camcorder which has a DV output/input connector. Because the signals are digital, there is no loss of video or audio quality as a result of editing.

1	MAKE CONNECTIONS
	A If the camcorder has no DV OUT/IN connector:
	Connect an AV cable between the camcorder’s
	VIDEO OUT and AUDIO OUT connectors and your
	VCR’s VIDEO IN and AUDIO IN connectors.

●If connecting a camcorder with an S-VIDEO output connector, it is recommended to use the S-VIDEO connection to minimize picture degradation while editing.

●When a Master Edit Control-equipped JVC camcorder is used, the camcorder is capable of controlling your VCR. The mini-plug cable is a mono 3.5 mm mini-plug to mono 3.5 mm mini-plug connector.

●If connecting to a camcorder with a monaural output, connect the audio output connector on the camcorder to AUDIO IN L of the VCR.

BIf the camcorder has a DV OUT/IN connector: Connect the camcorder’s DV OUT/IN connector to the VCR’s DV IN/OUT connector.

LOAD A CASSETTE

2 Insert the cassette to be recorded on into the recorder.

SELECT RECORDING DECK

Player

VIDEO OUT

3 Press VHS or DV.

Camcorder	Mini-plug cable
AUDIO OUT	(not supplied)
	(JVC camcorder only)
EDIT

B

Recorder

Your VCR

DV IN/OUT

PAUSE connector

DV Cable VC-VDV204U (not provided)

Player

	DV Camcorder DV OUT/IN	Mini-Plug Cable
	DV Camcorder DV OUT/IN	(not provided)
		(not provided)
		(JVC camcorder only)
	EDIT

NOTES:

●When connecting this recorder to a device equipped with a DV input connector, be sure to use the optional DV cable (VC-VDV204U).

●The signals through the DV IN/OUT connector cannot be recorded on the VHS deck, even though → of the DUB button is pressed.

●When you are editing through the DV IN/OUT connector, the recorder will stop if the player begins playing a blank portion of tape or the signal is interrupted.

Image 56

Contents SR-VS10U Dear Customer Do not place the VCRInstallation Antenna Installation InstructionsServicing Before YOU Install Your NEW VCRUSE Contents Connections AC power Connect VCR to TVANT. in Antenna or Cable input Component video Cable not suppliedPlug & Play Setup Plug & PlayEN I Nitial Sett Ings Auto Clock Set/Auto Tuner SetLanguage Access Main Menu Screen Access Initial SET ScreenAccess Clock SET Screen EN Initial SettingsSemi-Auto SET Auto Clock to onSelect Host Channel Select D.S.T. Mode Select Time ZoneReturn to Normal Screen SET TimeAccess Tuner SET Screen TunerSET Set Receivable ChannelsAccess Main Menu Screen Access Manual Channel SETAdd Or Delete a Channel ScreenCable Box Control Situate ControllerAttach Controller Connect Cable BOX to VCRAccess Cable BOX SET Turn on Cable BOXSelect Cable BOX Output ChannelBrand Code Access Cable BOX Brand SET ScreenEnter Cable BOX Brand DBS Receiver Control Connect DBS Receiver to VCRYour VCR Controller DBS receiverTurn on the TV and select the AV mode JVC SET DBS Receiver BrandJVC Dish Network Echostar Dish Network Simple Playback Simple Recording Playback Features Pause During PlaybackActivate FRAME-BY Frame Playback Activate SLOW-MOTIONLayback and Recording Features Activate HIGH-SPEED SearchVariable-Speed Search/ Reverse Motion Playback Still Picture/Frame-By-FrameAccess Mode SET Screen Select Superimpose SET ModeSuperimpose VHSEngage Manual Tracking Mode Adjust Manual TrackingAccess Distant Code RE-ENGAGE Automatic TrackingStart Repeat Stop RepeatPicture Control VHS deck only Video Stabilizer Select The SoundtrackDigital TBC/NR VHS deck only Arrow to Digital TBCNR by pressing CH 5 or Then press OK or #toArrow to VHS Mode SET by pressing CH 5or Arrow to Digital R3 byPressing CH 5 or %Þ Then press OK or #to setZoom During Playback Move ScreenStop Zoom Activate PlaybackAccess DV Mode SET Sound Mode Selection32kHz Mode Setting Sound YOU HearActive Video Calibration VHS deck onlyRecording Recording Features Select 2ND Audio Record SET Mode ModeLocate Start Point Resume RecordingVHS Super VHS, S-VHS Access VHS Mode SETSelect S-VHS Mode Arrow to S-VHS ET by Pressing CH5 or%ÞVCR Plus+ Timer Programming EN Timer RecordingAccess VCR PLUS+ Screen NumberEngage Timer Mode Check Program DataArrow to Initial SET Changing VCR Plus+ SettingVCR Plus+ Guide Channel Matching Access Guide Channel SET Screen Ex. When inputting the Guide Channel number 6 for WNJUIndInput Guide Channel Number Input Receiving Channel NumberSET Channel Number Express Timer ProgrammingSET Program Date Power Access Program Check Screen Access Program ScreenCheck, Cancel And Revise Programs ProgramSelect Auto SP →EP Timer SET Mode Auto SP→EP TimerTimer Recording Auto TimerArrow to Auto Timer Then press OK or # to setInstant Timer Recording ITR Engage ITR ModeSET Recording Duration Press REC on the front panelTape Dubbing Load CassettesSelect Dubbing DirectionNormal Dubbing Pause DubbingEND Dubbing For the playing deckLocate EDIT-IN Point Random Assemble EditingProgram Editing Memory 8 programmes x 8 scenes Locate EDIT-OUT Point USE FADE/WIPE Effect on Scene Transition If Necessary Register Additional Scenes PauseEditing Menu Effect Fader White Fader BlackFader Mosaic Fader B.WEdit From a Camcorder Make ConnectionsLoad a Cassette Select Recording DeckSelect AUX Input SET Mode Control SET ModeSelect Edit for Picture VHS Deck onlyVideo Edit To Or From AnotherMake Connections SET RECORDER’S Input Mode OUTPUT1 SettingSelect Edit for PIC Start PlayerSET Input Mode Audio DubbingSelect Recording Deck Engage Audio DubbingWhen monitoring the sound during Audio Dubbing, END Audio DubbingDV Insert Editing SP Mode Only Insert EditingLocate END Point VHS Deck onlyReset the Counter Engage Insert EditingStart Editing END Insert EditingConnecting To a Video Titler VHS Connecting To a PrinterDigital printer SET Remote Control Mode Turn on the TVSET TV Brand Code Operate TVCable Box Multi-Brand Remote Control Turn on the Cable BOXOperate Cable BOX Cable BOX Brand Name Brand CodeSET Remote Control Special FeaturesDBS Receiver Multi-Brand Remote Control Turn on the DBSUnplug Vcrs Power Plug in Power CordTurn VCR Power on CordRecording won’t start Cassette gets stuck partwayThen insert the cassette Re-perform the set-up procedures Timer againPoint is not dubbed That ä appears on the front display PanelRe-perform the VCR Plus+ setup Procedure pgRoubleshooting Plus+ system doesn’t work properlyQuest Ions and Answers EN Can the VCR indefinitely remain in the still mode?Can the VCR indefinitely remain in the Record-Pause mode? What happens if the tape runs out during recording?Index Front ViewRear View VHS Display Panel Remote Control Express Timer Programming MBR Multi-Brand Remote Code SettingList Of Terms Component Video ConnectionSpeci Fications SR-VS10U