PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is the key number of the part, from the PART LIST near the end of this manual. Important: Some small parts may have been preattached. If a part is not in the hardware kit, check to see if it has been preattached.
M4 x 12mm
M6 Washer (21)
M6 x 35mm Screw (15)
M8 Washer (20)
M8 x 38mm Bolt (18)
M8 Nylon Locknut (24)
M8 x 63mm Bolt (16)
M8 x 80mm Screw (13)
M10 Nylon Locknut (19)
M10 x 190mm Bolt (14)
5