ASSEMBLY
| Make Assembly Easier | • | Place all parts in a cleared area and remove the | |
|
| packing materials. Do not dispose of the packing | ||
| Everything in this manual is designed to ensure |
| materials until assembly is completed. | |
|
|
| ||
| that the weight bench can be assembled suc- | • | As you assemble the weight bench, make sure all | |
| cessfully by almost anyone. By setting aside |
| parts are oriented as shown in the drawings. | |
| plenty of time, assembly will go smoothly. |
|
| |
|
| • | Tighten all parts as you assemble them, unless | |
Before beginning assembly, carefully read the fol- |
| instructed to do otherwise. | ||
• | For help identifying small parts, use the PART | |||
lowing information and instructions: | ||||
• | To hire an authorized service technician to |
| IDENTIFICATION CHART on page 5. | |
• | Assembly requires only the included tools. | |||
| assemble the weight bench, call | |||
• | Assembly requires two persons. |
| Assembly may be more convenient if you have a | |
| socket set, a set of | |||
|
|
| ||
• | Make sure that there is enough clearance to walk |
| wrenches, or a set of ratchet wrenches. | |
|
| |||
around the weight bench as you assemble it.
1.
Before beginning assembly, make sure that you have read and understand the information in the box above.
Orient the Front Stabilizer (2) as shown. Attach the Front Stabilizer and the Frame (1) to the Front Leg (25) with four M8 x 63mm Bolts (16), four M8 Washers (20), and four M8 Nylon Locknuts (24). Do not tighten the Nylon
1
16 20
1
Locknuts yet.
2024
16
25
224
Holes 
6