HOW to Operate the Electronic Monitor

1.To turn on the power, press the on/reset button or simply begin pedaling. When the power is turned on, the entire display will appear for two seconds. The electronic monitor will then be ready for operation.

2.Select one of the five modes:

Scan modeÑWhen the power is turned on, the scan mode will automatically be selected. One mode arrow

will show that

the scan mode

is selected, and a flashing mode arrow

will show which mode is

currently

displayed. Note: If a different mode is selected, you can select the scan mode again by repeatedly pressing the mode button.

Speed, time, distance or calorie modeÑTo select one of these modes for continuous display, press the mode

button repeatedly. The mode

arrows will

show which

mode is selected. (Make sure

that the scan mode is not selected.)

3.To reset the display, press the on/reset button.

4.To turn off the power, simply wait for about four minutes. Note: The monitor has an Òauto-offÓ feature. If the pedals are not moved and the monitor buttons are not pressed for four minutes, the power will turn off automatically in order to conserve the batteries.