7.Press the 3/4” x 2” Inner Cap (33) into the open end of the Seat Mounting Bracket (23).
Lubricate a 3/8” x 3” Bolt (21). Attach the Seat Adjustment Bracket (36) to the indicated side of the Seat Mounting Bracket (23) with the Bolt and a 3/8” Nylon Locknut (11). Note: Do not overtighten the
Nylon Locknut; the Seat Adjustment Bracket must pivot easily.
8.Place the Seat Mounting Bracket (23) on the Bench Frame (5) so that the Seat Adjustment Bracket (36) fits over the welded pin on the side of the Bench Frame.
Lubricate a 3/8” x 3” Bolt (21). Attach the Seat Mounting Bracket (22) to the indicated bracket on the Bench Frame (5) with the Bolt and a 3/8” Nylon Locknut (11). Note: Do not overtighten the Nylon
Locknut; the Seat Mounting Bracket must pivot easily.
9.Turn the Seat (14) as shown. Attach the wide end of the Seat to the bracket on the Seat Mounting Bracket (23) with two 1/4” x 3/4” Screws (3) and two 1/4” Washers (30).
Tilt the Seat Mounting Bracket (23) upwards and attach the narrow end of the Seat (14) to the Seat Mounting Bracket with a 1/4” x 1 1/4” Screw (34) and a 1/4” Washer (30).
10.Attach the Adjustable Bench Leg (2) to the Bench Leg (1) with the Adjustment Knob (37).
Insert a 1 1/2” Square Inner Cap (40) into the top of the Adjustable Bench Leg (2).
7 | 21 |
|
|
|
|
| |
| 36 |
| 23 |
|
|
| |
| Lubricate |
|
|
|
|
| 11 |
| 33 |
|
|
8 |
|
|
|
| 23 |
|
|
| 36 |
|
|
| 21 |
|
|
Lubricate |
|
| |
| Welded |
|
|
| Pin |
|
|
|
| 5 | 11 |
|
|
| |
9 |
|
|
|
| 14 |
|
|
| Bracket |
|
|
| 23 |
|
|
| 30 |
|
|
| 3 |
|
|
| 34 |
|
|
10 | 40 |
|
|
|
|
| |
|
| 2 |
|
| 37 |
|
|
| 1 |
|
|
8